Chapel Testing System

The Chapel testing system is a key piece of technology for the Chapel developer. We use it as a harness for doing test-driven development, for performing sanity checks on code before committing it, for bug and issue tracking, and for nightly correctness and performance regression testing. Getting really comfortable with it is one of the most important things a developer can do early in the development cycle.

The tests for the testing system are located in $CHPL_HOME/test. The main script that drives the test system itself is $CHPL_HOME/util/start_test, though it relies on several helper scripts located in $CHPL_HOME/util/test.

This document provides only a high-level introduction to the testing system. For further details, ask a core Chapel developer for suggestions. You can also get a sense for the test system by looking through the test directory itself to see how it is used in practice.

Outline

How to Make

A Correctness Test

Though trivial, this test is available at $CHPL_HOME/test/Samples/Correctness in the Chapel source repository

A simplest use of the test system is to create a .chpl file containing some Chapel code and a .good file containing the expected output. For example, given a directory containing two files:

hi.chpl

writeln("Hi!");

hi.good

Hi!

The test system can be exercised by invoking:

start_test hi.chpl

This is assuming $CHPL_HOME/util/ is in the user’s $PATH, which is taken care of when sourcing $CHPL_HOME/util/setchplenv.bash.

This will cause the compiler to compile hi.chpl. If compiling hi.chpl does not cause a compilation failure, start_test will then execute the resulting binary. The concatenation of the compiler and executable output will then be compared against the .good file. A transcript of the test system’s actions is printed to the console and also stored in $CHPL_HOME/test/Logs/ by default.

For more information on using start_test, see Invoking start_test.

Outside Arguments or Settings

In addition to the simplest form of test shown above, the test system supports a number of additional options for creating more complex tests.

These options are all specified using files in the same directory as the test. Some files apply to a directory as a whole while others will apply to a single test by sharing the same base filename. Those files which impact the entire directory are named in upper case, e.g. COMPOPTS, or PERFNUMTRIALS. They can be overridden or augmented with test-specific settings using the same name but in lower case, e.g. foo.compopts.

Compile-time Arguments

To specify arguments to the compiler, provide a COMPOPTS or .compopts file for the test. All options for a single compilation should be on the same line - specifying multiple lines will result in multiple compilations of the test file.

For instance, to specify that the program should be compiled statically, this file would be provided:

hi.compopts

--static

To specify that the program should be compiled once statically and once dynamically, the file would look like this:

hi.compopts

--static
--dynamic

Note that sometimes different compilation arguments will result in different output. Testing Different Behavior in Different Settings provides guidance on how a test could respond to different behavior without modifying the output that is generated.

Execution-time Arguments

Specification of arguments for execution time is performed similarly, using a EXECOPTS or .execopts file. Should both an .execopts and a .compopts file be provided for a test, their options will be used in combination. For example, a test specified like this:

multiple-options.chpl

config var x = true;

if (x) then writeln(5); else writeln(7);

multiple-options.compopts

--static
--dynamic

multiple-options.execopts

--x=true
--x=false

will be compiled twice, and executed four times by start_test:

  • Compilation 1:

    chpl --static multiple-options.chpl

    • Execution 1:

      ./multiple-options --x=true

    • Execution 2:

      ./multiple-options --x=false

  • Compilation 2:

    chpl --dynamic multiple-options.chpl

    • Execution 3:

      ./multiple-options --x=true

    • Execution 4:

      ./multiple-options --x=false

Note that sometimes different execution arguments will result in different output. Testing Different Behavior in Different Settings provides guidance on how a test could respond to different behavior without modifying the output that is generated.

Environment Variables

Environment variables can be set for a particular test or directory using a .execenv or EXECENV file. Each environment variable must be specified on a separate line, but all will be set for a particular run.

Here is an example .execenv file:

CHPL_RT_NUM_THREADS_PER_LOCALE=100

Controlling How It Runs

The testing system has a variety of files that can fine tune when a test gets run.

If the test should only be compiled and not executed, mark it with an empty file with the suffix .noexec, e.g. foo.noexec. If the test should not be compiled or executed on its own (for instance, if it is solely a helper file for another test), give an empty file with the suffix .notest. A directory with an empty NOTEST file will similarly not be run by the testing system (unless its contents are explicitly listed in the call to start_test).

Running Multiple Times

By default, each correctness test is run only once. It is possible to specify that a test should be run multiple times by providing a .numtrials file for that test, or by passing -num-trials to start_test. For instance, the following file would cause the test to be run 10 times:

foo.numtrials

10

Note that a .numtrials file will override any explicit -num-trials value.

Limiting Time Taken

Normally, start_test will kill a test that has taken longer than 300 seconds to execute or has been compiling for longer than four times the execution timeout value.

The execution timeout value can be overridden for a test by specifying the number of seconds in a .timeout file. It can be set either higher than the default timeout (for tests that take an unusually long time to run) or lower (for tests that are expected to finish very quickly). The former is used more frequently, but the latter is useful when diagnosing a test failure - if the test is usually quick but occasionally hangs, a smaller timeout value can help speed up the time to run the testing system when the failure mode does occur.

Note that if the value in this file is longer than the global timeout, any explicit -num-trials value or .numtrials file will be ignored and the test will run only once.

Tests With Varying Output

Limiting Where the Test Runs

Sometimes a test is only applicable to certain test environments: it might rely on multi-locale state, or change its behavior dramatically depending on if optimizations are used, for instance. If a test is only intended to run in certain settings, a SKIPIF or .skipif file should be used.

A directory-wide SKIPIF file or a test-specific .skipif file can take two forms. The first is a line separated list of easily computed conditions, any one of which will cause the test not to run in that particular setting. For instance, the following file would only allow foo.chpl to run in a single-locale setting:

foo.skipif

CHPL_COMM != none

This is useful when the conditions required to skip a test can be easily determined from the environment. A condition of <= indicates that the test should be skipped when the environment variable on the left contains the contents on the right, while >= indicates the opposite - this is useful for imprecise matches, e.g. CHPL_HOST_PLATFORM >= cygwin would cause the test to run on both cygwin64 and cygwin32.

The second form a .skipif or SKIPIF file can take is that of a script. This form is intended for conditions that require some computation to determine, or when the combination of conditions is necessary (i.e. this setting and this setting are required for the behavior we want to avoid). The script can be in any commonly supported scripting language, usually bash or python. The .skipif or SKIPIF file must have executable permissions for this form to work. Printing True to standard output will result in the test being skipped, while printing False will result in the test being run.

For instance:

foo.skipif

#!/usr/bin/env python3

import os
print(os.getenv('CHPL_TEST_PERF') == 'on' and
      os.getenv('CHPL_ATOMICS') == 'locks')

would cause the test to be skipped when performance testing is done with CHPL_ATOMICS=locks, but not ordinary performance testing, or correctness testing with CHPL_ATOMICS=locks

Testing Different Behavior in Different Settings

If a test is intended to work in all settings but will have slightly different behavior in some situations, it is appropriate to add additional .good files for those settings. Some of these additional .good files will be used automatically by the testing system, while others will need to be specified explicitly in the .compopts or .execopts file for the test.

start_test automatically recognizes .good files with prefixes for --no-local, communication layer, locale model, and chpldoc. For example:

  • .comm-none.good: used with CHPL_COMM=none (the unqualified .good file will then apply for CHPL_COMM != none)

  • .comm-gasnet.good: used with CHPL_COMM=gasnet

  • .comm-ofi.good: used with CHPL_COMM=ofi

  • .comm-ugni.good: used with CHPL_COMM=ugni

  • .no-local.good: used with --no-local testing

  • .na-none.good: used with CHPL_NETWORK_ATOMICS=none

  • .tasks-fifo.good: used with CHPL_TASKS=fifo

  • .doc.good: used when testing chpldoc instead of chpl

Note that .comm-, .na-, and lm- can be combined, in that order. For instance mytest.comm-none.tasks-fifo.good.

Requests can be made for supporting additional formats if a common format does not appear to be covered automatically.

If only some compilations or executions of a test need a specialized .good file, a comment on the same line as the relevant options can be used. For instance:

foo.execopts

--x=true # foo.true.good
--x=false # foo.false.good

will compare test output to foo.true.good for the first execution and foo.false.good for the second.

Any line that is unlabeled will use the default .good for that test. Undefined behavior will occur when both the .compopts and .execopts files specify a .good file in this way.

If you want to use use default arguments for the test but specify a different .good file, you can add a line in your compopts/execopts file as follows (note the space before the #):

# foo.execopts
 # foo.true.good

Using precomp, preexec, and prediff files

When creating a .precomp, .preexec, or .prediff file, the file must be an executable. You can turn your script into an executable by running: chmod +x foo.precomp. To specify these files for entire directories, the files should be named PRECOMP, PREEXEC, and PREDIFF, respectively.

If you wish to have a system wide .prediff file, you can use the CHPL_SYSTEM_PREDIFF environment variable that takes a comma-separated list of prediffs to run after every test before comparing to the .good file.

Using PRETEST

PRETEST allows you to run a script once before any test is run in a directory. This can be used to set up a test, for example, by generating .good files, or create/build other programs that are used by the test. The file must be an executable. You can turn your script into an executable by running: chmod +x PRETEST.

Note that the PRETEST script will not be run for any subdirectories and must be either duplicated or have a symbolic link to the parent directory. You can add a symlink to a file in a parent directory by running: ln -s ../PRETEST PRETEST

A Performance Test

This section covers how to make a performance test, including:

  • how to indicate it is a performance test

  • how to specify which parts of the output should be tracked

  • how to validate the output

  • how to specify compilation and execution options that are different from the test’s normal run

  • how to track output for multiple tests

  • how to compare against a version written in C

  • how to graph the data that has been tracked

[Files used to illustrate the running example here can be found at $CHPL_HOME/test/Samples/Performance in the Chapel source repository]

Identifying Performance Keys

Most of the information above pertains to the creation of a correctness test, in which the test’s output is compared to a .good file. The testing system also supports performance tests in which one or more values from a test’s output can be tracked on a nightly basis and optionally graphed. Information about running a performance test can be found in Performance Testing.

Performance tests are specified using a .perfkeys file, which lists strings that the test system should look for in the output serving as prefixes for a piece of data to track. When crawling a directory hierarchy, only tests with .perfkeys files will be considered when testing in performance mode. For example, if a test named foo.chpl generates output in the following format:

Time: 194.3 seconds
Memory: 24GB
Validation: SUCCESS

one could track the two numeric values using a .perfkeys file as follows:

foo.perfkeys

Time:
Memory:

As the test system runs, it will look for the specified performance keys in the test output and store the string following the key as part of the performance test output (described below). Note that one could also track the Validation string in this way, though there are better ways to track success/failure conditions, described in the next section.

Validating Performance Test Output

In addition to identifying key-value pairs to track, performance testing can also do some simple validation of test output using regular expression-based matching. A line starting with verify:[<line#>:] (or reject:[<line#>:]) followed by a regular expression will ensure that the test output contains (does not contain) the given regular expression, and count any surprises as failures in the testing results. The optional line# constrains what line number the output must appear on, where a negative number indicates that the counting should start at the end of the file.

For example, adding a third line to the .perfkeys file, we can also verify that the last line of output contains the string “SUCCESS”:

foo.perfkeys

Time:
Memory:
verify:-1: SUCCESS

Accumulating Performance Data in .dat files

The values collected during performance testing are stored in a .dat file in the directory specified by $CHPL_TEST_PERF_DIR (if undefined, the test system defaults to $CHPL_HOME/test/perfdat/<machineName>). Each time the test is run in performance mode, a new line of data is added to the end of the .dat file. The line will start with the date, and the data for each key will be tab-separated. The base name for the .dat file is taken from the .perfkeys file. For example, the output for the test above would be stored in a file named foo.dat.

Here is a sample .dat file, for the performance test at $CHPL_HOME/test/Samples/Performance:

# Date     Time:   Memory:
03/26/18   194.3   24
04/02/18   194.3   24

Because the lines are tab-separated, the key will not necessarily “line up” visually with the corresponding header. Modifying these files by hand is inadvisable.

Performance tests submitted to the Chapel repository are run on a nightly basis, generating these .dat files. Modifications to the .perfkeys that specify them will impact the .dat files that have already been generated, so please be careful when updating already existing performance tests.

Note that in practice, most tests are written to be run in both a correctness and a performance mode, using a bool config const to skip the printing of nondeterministic data such as the Time (and possibly Memory) values above. We tend to make tests run in performance mode by default and use a foo.execopts file to make the correctness testing flip this switch (since end users will typically want the performance data on and there’s nothing worse than firing off a long run only to find you didn’t turn on the performance metrics).

Other Performance Testing Options

Like correctness testing, performance testing supports the ability to specify different compiler and execution-time options, etc. This is done using files, as in correctness testing, where the filenames tend to start with PERF* or .perf*. For example, foo.perfcompopts would specify compiler options that should be used when compiling the test for performance mode while foo.perfexecopts specifies execution-time options for performance testing. The number of trials for performance testing can be specified in a foo.perfnumtrials file.

Comparing Multiple Versions

Most performance tests are most interesting when comparing multiple things to one another – for example, multiple implementations of an algorithm, a test compiled in various configurations, a Chapel vs. C version, etc. The approach typically taken here is to have each configuration write output to its own .dat file and then to graph columns from various .dat files against one another.

To compare multiple distinct Chapel tests, the approach is easy; simply make each one a performance test with a distinct name. (In fact, Chapel performance tests must have unique names across the entire testing system because all .dat files are placed into a single directory at the end; the system itself checks for conflicts and complains if it finds any).

To compare a single Chapel test compiled or run in multiple configurations, the approach taken is to use multi-line versions of the .perfcompopts OR .perfexecopts files, where each line represents a different configuration that should be tested. Each option line should be concluded with a # comment delimiter, after which a .perfkeys file should be named. For example, to compare two problem sizes, one might use:

bar.perfexecopts

--n=100    # bar-100.perfkeys
--n=10000  # bar-10000.perfkeys

This would cause bar.chpl to be compiled once and executed twice, one with --n=100 and the second time with --n=10000. The first execution would use bar-100.perfkeys for its performance keys and write its output to bar-100.dat while the second would use bar-10000.perfkeys and write its output to bar-10000.dat.

Comparing to a C version

To compare a C version of a test to a Chapel version, the C version of the test must end with the suffix .test.c for single locale tests and .ml-test.c for multilocale tests. Since .dat files must have unique names, the base name for the C test should vary from the Chapel equivalent. For example, I might name the C version of the foo.chpl performance test foo-c.test.c. Like any other test, the C test needs a .good file for correctness testing and a .perfkeys file for performance testing.

C versions do not have to be performance tests, but this is their most common use case.

Creating a graph comparing multiple variations

Once you are creating multiple .dat files containing data you would like to graph, you’ll create a .graph file indicating which data from which .dat files should be graphed. For example, to compare the timing data from the foo.chpl and foo-c.c tests described above, one might use the following foo.graph file (note that the graph file’s basename need not have any relation to the tests it is graphing since they are typically pulling from multiple .dat files; making the filename useful to human readers is the main consideration).

foo.graph

perfkeys: Time:, Time:
files: foo.dat, foo-c.dat
graphkeys: Chapel version, C version
ylabel: Time (seconds)
graphtitle: Sample Performance Test (Bogus)

Briefly, the following three entries need to have the same arity, corresponding to the lines in the graph:

  • perfkeys: is a comma-separated list of perfkeys to graph from…

  • files: …the comma-separated list of .dat files, respectively

  • graphkeys: this is a comma-separated list of strings to use in the graph’s legend.

The following two entries are singletons:

  • ylabel: a label for the graph’s y-axis (the x-axis will be the date the test was run by default)

  • graphtitle: a title for the graph as a whole

Finally, add the .graph file to $CHPL_HOME/test/GRAPHFILES. This file is separated into a number of suites (indicated by comments) followed by graphs that should appear in those suites (a graph may appear in multiple suites). This file determines how graphs are organized on the Chapel performance graphing webpages (currently hosted at http://chapel-lang.org/perf/).

Once the .graph file exists and is listed in GRAPHFILES, running start_test -performance will cause the test system to not only create the .dat files, but also to create a graph as described in the .graph file. To view the graph, point your browser to $CHPL_TEST_PERF_DIR/<machinename>/html/index.html. Then select the suite(s) in which your graph appears, and you should see data for it. (Note that for a new graph with only one day of data, it can be hard to see the singleton points at first).

Multilocale Performance Testing

Writing a performance test for multilocale setting has similarities to single locale performance testing and multilocale correctness testing. However, helper file suffixes differ from the previously covered ones as follows:

Single Locale Performance

Multilocale Performance

.perfexecopts

.ml-execopts

.perfcompopts

.ml-compopts

.perfkeys

.ml-keys

.graph

.ml-perf.graph

.execenv

.ml-execenv

Multilocale Correctness

Multilocale Performance

.numlocales

.ml-numlocales

Graph files for multilocale performance tests are listed in ML-GRAPHFILES instead of GRAPHFILES.

Finally to run a multilocale performance test start_test --perflabel ml- must be used.

Multilocale Communication Counts Testing

Another type of multilocale testing is where the number of communication calls (e.g. GETs, PUTs, ONs) generated is tracked. These numbers can be obtained with the help of CommDiagnostics module and be printed out similar to printing out the time elapsed or throughput.

Communication counts testing is only applicable in a multilocale setting, and it is similar to multilocale performance testing. However, for helper files cc- label is used instead of ml-.

Test Your Test Before Submitting

Before submitting your test for review, be sure that it works under

  • start_test

  • start_test --performance

  • start_test --perflabel ml- (if applicable)

  • start_test --perflabel cc- (if applicable)

modes when running within the directory (or directories) in question. Nothing is more embarrassing than committing a test that doesn’t work on day one.

Once the test(s), .graph files, and GRAPHFILES are committed to the Chapel repository, they will start showing up on the Chapel public pages as well.

A Test That Tracks A Failure

The testing system also serves as our current system for tracking code-driven bugs and open issues. When a bug is encountered (either by a user or a developer), if it is not quickly resolved then it will be tracked by making what is known as a future.

When making a new test that is a future, follow the guidelines for making a correctness test. Like normal correctness tests, a future will specify a .good file with its intended output. However, the future is not expected to match against the .good file when the future is filed - developer effort is usually required to fix the bug.

Once this test is created (or if a test already exists), add a .future file sharing the same base name as the test to mark it as a future. For example, adding a hi.future file would make the simple correctness test at the start of this document into a future test.

Marking a test as a future causes it to be tested every night, but not to be counted against the compiler’s success/failure statistics. If/when the future matches its .good file, developers will be alerted by the testing system.

The format of the .future file itself is minimally structured. The first line should contain the type of future (see list below) followed by a brief (one 80-column line) description of the future, which ideally reflects the associated GitHub issue title. The next line should contain the associated GitHub issue number in the #issue-number format, e.g. #1.

The rest of the file is optional and free-form. It can be used over the future’s lifetime to describe in what way the test isn’t working or should be working, implementation notes, philosophical arguments, etc.

The current categories of futures reflect GitHub labels:

  • bug: this test exhibits a bug in the implementation

  • error message: this test correctly generates an error message, but the error message needs clarification/improvement

  • feature request: a way of filing a request for a particular feature in Chapel

  • performance: indicates a performance issue that needs to be addressed

  • design: this test raises a question about Chapel’s semantics that we ultimately need to address

  • portability: indicates a portability issue that needs to be addressed

  • unimplemented feature: this test uses features that are specified, but which have not yet been implemented.

GitHub Issues

Currently, it is mandatory to include a GitHub issue number with any new futures. That said, futures that pre-date Chapel’s adoption of GitHub issues may have a description instead of an issue number.

When filing a bug report as an issue, it is considered good practice to include a future for the issue tracked on the GitHub issues page.

Tracking Current Failure Mode

Sometimes a future will change its behavior, but not be resolved. The future should be updated to continue to track the issue as much as possible - to alert developers when this happens, it is necessary to track not only the expected good output but also the output indicating the current failure. This is done via a .bad file. The contents of a .bad file are similar to a .good file and should match the currently generated output of the test.

Tests whose current/.bad output varies based on the compiler version number, line numbers of standard modules and such are fragile since these things change frequently; in such cases, either a .prediff should be used to filter the output before comparing to .bad, or the .bad should be omitted. Ultimately, our intention is to support a library of common recipes for .bad files, but this has not been implemented yet.

An easy way to obtain this file is to run the future once using start_test - the output for that configuration can then be found in a .out.tmp file in the same directory as the test.

Resolving a Future

There are three situations under which a future will get resolved.

  1. A developer explicitly works on resolving the future.

  2. A developer works on another feature or issue and as a consequence the future gets resolved.

    • This could happen if the two issues appeared to be unrelated, or if the existence of the future had been forgotten

  3. A developer examines the future and determines the current behavior is correct

    • The developer may then either remove the supporting files for futures, or remove the test entirely.

Invoking start_test

A brief description of flags that can be used with start_test itself can be obtained by calling start_test -h.

Correctness Testing

The section titled A Correctness Test demonstrates invoking start_test on a single explicitly-named file. More generally, start_test takes a list of test and directory names on the command line and will run all tests explicitly named or contained within the directories (or their subdirectories). For example:

start_test foo.chpl bar/baz.chpl typeTests/ OOPTests/

will test the two explicitly-named tests (foo.chpl and baz.chpl stored in the bar/ directory). It will also recursively search for any tests stored in the typeTests/ and OOPTests/ subdirectories.

If invoked without any arguments, start_test will start in the current directory and recursively look for tests in subdirectories.

If invoked with the --valgrindexe flag, start_test will compile the program and execute it with valgrind. The --valgrind flag does the same, plus it also runs the compiler under valgrind, which increases testing time compared to --valgrindexe. To learn about best practices with valgrind, see Valgrind.rst.

Parallel Testing

To run correctness tests in parallel, paratest.local can be invoked directly. For example:

(cd $CHPL_HOME/test && $CHPL_HOME/util/test/paratest.local -dirs deprecated -dirs unstable)

This command will run all tests in $CHPL_HOME/test/deprecated and $CHPL_HOME/test/deprecated using 10 processes. Note that the parallelism is at the directory level granularity, so if a directory is flat (containing only files) it will still run serially with this command.

GPU Testing

To run tests with the GPU locale model, the environment variable CHPL_TEST_GPU needs to be set. For more information on running tests with GPUs, see the GPU tech note.

Performance Testing

To run performance testing, add the --performance flag to start_test along with the traditional options. So for example, to run this single test in performance mode, one could use:

start_test --performance foo.chpl

When crawling a directory hierarchy, only tests with .perfkeys files will be considered when testing in performance mode.

All performance tests are compiled with --fast by default and --static when it’s not problematic for the target configuration.

Sample Output

The output from a start_test run will begin with a list of the settings used, following the environment settings as obtained from printchplenv (see Setting up Your Environment for Chapel). This will be followed by information from running the individual tests or directories.

The output from start_test will end with the location of the log file containing all the output from its execution, as well as a summary of all tests that failed and any futures that were run. This will look something like this:

[Test Summary - 180328.134706]
[Error matching program output for path/to/failing/correctness/test]
Future (bug: description of bug from future file) [Error matching program output for path/to/failing/future]
Future (bug: description of bug from future file) [Success matching program output for path/to/passing/future]
[Summary: #Successes = 1 | #Failures = 1 | #Futures = 2 | #Warnings = 0 ]
[Summary: #Passing Suppressions = 0 | #Passing Futures = 1 ]
[END]

Successful tests will not be printed after the line beginning with [Test Summary unless they had a .future file (see A Test That Tracks A Failure for information about .future files).

When nightly testing is run, core developers will be notified of every configuration with a new failure, warning, passing suppression, and/or passing future.

Summary of Testing Files

The following table serves as a quick reference for the various test files, and as a table of contents for this page. It is not necessarily complete, and not all of it has been covered in this document. Please ask a member of the core team for more information on a specific file.

Using file base name, foo for the filenames in this table.

File

Contents of file

correctness

foo.chpl

Chapel test program to compile and run

foo.test.c

Single locale C test program to compile and run. See Comparing to a C version for more information

foo.ml-test.c

Multilocale C test program to compile and run. See Comparing to a C version for more information

foo.good

expected output of test program

Test Settings

foo.compopts

line separated compiler flag configurations. See Compile-time Arguments for more information

COMPOPTS

directory-wide compiler flags

foo.execopts

line separated runtime flag configurations. See Execution-time Arguments for more information

EXECOPTS

directory-wide runtime flags

foo.execenv

line separated list of environment variables settings. See Environment Variables for more information

EXECENV

directory-wide environment variables

foo.numlocales

number of locales to use in multilocale run

NUMLOCALES

directory-wide number of locales to use in multilocale run

Helper files

foo.catfiles

line separated list of files to include when validating the expected output

CATFILES

directory-wide list of files to compare with output

foo.prediff

script that is run on the test output, before taking the diff between the output and .good file

PREDIFF

directory-wide script that is run over test output

foo.precomp

script that is run prior to compilation of the test program

PRECOMP

directory-wide script that is run prior to compilation

foo.preexec

script that is run prior to execution of the test program

PREEXEC

directory-wide script that is run prior to execution

PRETEST

script that is run once per directory prior to any test being run

Testing System Settings

foo.cleanfiles

line separated list of files to remove before the next test run

CLEANFILES

directory-wide list of files to remove before test runs

foo.noexec

empty file. Indicates .chpl file should only be compiled, not executed. See Controlling How It Runs for more information.

NOEXEC

Indicates all .chpl files in this directory should only be compiled, not executed.

foo.notest

empty file. Indicates the file should not be run explicitly See Controlling How It Runs for more information.

NOTEST

empty file. Indicates the directory should not be run

foo.skipif

line separated list of conditions under which the test should not be run, or a script to compute the same. See Limiting Where the Test Runs for more information

SKIPIF

same as above, but applied to the entire directory

foo.suppressif

line separated list of conditions under which the test is expected to fail, or a script to compute the same. Note that unless otherwise specified, a .skipif or .future is likely more appropriate for the test.

foo.timeout

time in seconds after which start_test should stop this test See Limiting Time Taken for more information

foo.numtrials

number of execution trials to run

NUMTRIALS

directory-wide number of execution trials to run

performance (replace “perf” with “ml-” and “cc-” as necessary)

foo.perfcompopts

compiler flags, overrides .compopts for –performance

PERFCOMPOPTS

directory-wide performance compiler flags

foo.perfexecopts

runtime flags, overrides .execopts for –performance

PERFEXECOPTS

directory-wide performance runtime flags

foo.perfexecenv

environment variables, overrides .execenv for –performance

PERFEXECENV

directory-wide performance environment variables

foo.perfnumtrials

number of execution trials to run if no timeout specified

PERFNUMTRIALS

directory-wide number of execution trials to run

foo.perftimeout

time in seconds after which start_test should stop this test

foo.perfkeys

keys to search for in the output

foo.graph

Specifies which data files and perfkeys to graph, and contains meta-data associated with labeling data sets, axis, and graphs

test/GRAPHFILES

Acts as an index that tracks all .graph that should be graphed.

futures

foo.future

Describes the future being tested, following the newline-separated format of: category, title, issue #

foo.bad

output generated on a failing test, to track if a known failing future begins failing a different way. See Tracking Current Failure Mode for more information