Domains¶
A domain is a firstclass representation of an index set. Domains are used to specify iteration spaces, to define the size and shape of arrays (Arrays), and to specify aggregate operations like slicing. A domain can specify a single or multidimensional rectangular iteration space or represent a set of indices of a given type. Domains can also represent a subset of another domain’s index set, using either a dense or sparse representation. A domain’s indices may potentially be distributed across multiple locales as described in Domain Maps, thus supporting globalview data structures.
In the next subsection, we introduce the key characteristics of domains. In Base Domain Types and Values, we discuss the types and values that can be associated with a base domain. In Simple Subdomain Types and Values, we discuss the types and values of simple subdomains that can be created from those base domains. In Sparse Subdomain Types and Values, we discuss the types and values of sparse subdomains. The remaining sections describe the important manipulations that can be performed with domains, as well as the predefined operators and functions defined for domains.
Domain Overview¶
There are three kinds of domain, distinguished by their subset dependencies: base domains, subdomains and sparse subdomains. A base domain describes an index set spanning one or more dimensions. A subdomain creates an index set that is a subset of the indices in a base domain or another subdomain. Sparse subdomains are subdomains which can represent sparse index subsets efficiently. Simple subdomains are subdomains that are not sparse. These relationships can be represented as follows:
domaintype:
basedomaintype
simplesubdomaintype
sparsesubdomaintype
Domains can be further classified according to whether they are regular or irregular. A regular domain represents a rectangular iteration space and can have a compact representation whose size is independent of the number of indices. Rectangular domains, with the exception of sparse subdomains, are regular.
An irregular domain can store an arbitrary set of indices of an arbitrary but homogeneous index type. Irregular domains typically require space proportional to the number of indices being represented. All associative domain types and their subdomains (including sparse subdomains) are irregular. Sparse subdomains of regular domains are also irregular.
An index set can be either ordered or unordered depending on whether its members have a welldefined order relationship. All regular domains are ordered. All associative domains are unordered.
The type of a domain describes how a domain is represented and the operations that can be performed upon it, while its value is the set of indices it represents. In addition to storing a value, each domain variable has an identity that distinguishes it from other domains that may have the same type and value. This identity is used to define the domain’s relationship with subdomains, index types (Domain Index Types), and arrays (Association of Arrays to Domains).
The runtime representation of a domain is controlled by its domain map. Domain maps are presented in Domain Maps.
Parallel Safety with respect to Domains (and Arrays)¶
Users must take care when applying operations to arrays and domains concurrently from distinct tasks. For instance, if one task is modifying the index set of a domain while another task is operating on either the domain itself or an array declared over that domain, this represents a race and could have arbitrary consequences including incorrect results and program crashes. While making domains and arrays safe with respect to such concurrent operations would be appealing, Chapel’s current position is that such safety guarantees would be prohibitively expensive.
Chapel arrays do support concurrent reads, writes, iterations, and operations as long as their domains are not being modified simultaneously. Such operations are subject to Chapel’s memory consistency model like any other memory accesses. Similarly, tasks may make concurrent queries and iterations on a domain as long as another task is not simultaneously modifying the domain’s index set.
By default, associative domains permit multiple tasks
to modify their index sets concurrently. This adds some amount of
overhead to these operations. If the user knows that all such
modifications will be done serially or in a parallelsafe context,
the overheads can be avoided by setting parSafe
to false
in
the domain’s type declaration. For example, the following
declaration creates an associative domain of strings where the
implementation will do nothing to ensure that simultaneous
modifications to the domain are parallelsafe:
var D: domain(string, parSafe=false);
As with any other domain type, it is not safe to access an
associative array while its domain is changing, regardless of
whether parSafe
is set to true
or false
.
Base Domain Types and Values¶
Base domain types can be classified as regular or irregular. Dense and strided rectangular domains are regular domains. Irregular base domain types include all of the associative domain types.
basedomaintype:
rectangulardomaintype
associativedomaintype
These base domain types are discussed in turn in the following subsections.
Rectangular Domains¶
Rectangular domains describe multidimensional rectangular index sets. They are characterized by a tensor product of ranges and represent indices that are tuples of an integral type. Because their index sets can be represented using ranges, regular domain values typically require only \(O(1)\) space.
Rectangular Domain Types¶
Rectangular domain types are parameterized by three things:
rank
a positiveint
value indicating the number of dimensions that the domain represents;idxType
a type member representing the index type for each dimension; andstridable
abool
parameter indicating whether any of the domain’s dimensions will be characterized by a strided range.
If rank
is \(1\), the index type represented by a rectangular
domain is idxType
. Otherwise, the index type is the homogeneous
tuple type rank*idxType
. If unspecified, idxType
defaults to
int
and stridable
defaults to false
.
Open issue.
We may represent a rectangular domain’s index type as rank*idxType even if rank is 1. This would eliminate a lot of code currently used to support the special (rank == 1) case.
The syntax of a rectangular domain type is summarized as follows:
rectangulardomaintype:
'domain' ( namedexpressionlist )
where namedexpressionlist
permits the values of rank
,
idxType
, and stridable
to be specified using standard type
signature.
Example (typeFunctionDomain.chpl).
The following declarations both create an uninitialized rectangular domain with three dimensions, with
int
indices:var D1 : domain(rank=3, idxType=int, stridable=false); var D2 : domain(3);
Rectangular Domain Values¶
Each dimension of a rectangular domain is a range of type
range(idxType, BoundedRangeType.bounded, stridable)
. The index set
for a rank 1 domain is the set of indices described by its singleton
range. The index set for a rank \(n\) domain is the set of all
n*idxType
tuples described by the tensor product of its ranges. When
expanded (as by an iterator), rectangular domain indices are ordered
according to the lexicographic order of their values. That is, the index
with the highest rank is listed first and changes most slowly. 3
Note
Future
Domains defined using unbounded ranges may be supported.
Literal rectangular domain values are represented by a commaseparated
list of range expressions of matching idxType
enclosed in curly
braces:
rectangulardomainliteral:
{ rangeexpressionlist }
rangeexpressionlist:
rangeexpression
rangeexpression, rangeexpressionlist
The type of a rectangular domain literal is defined as follows:
rank
= the number of range expressions in the literal;idxType
= the type of the range expressions;stridable
=true
if any of the range expressions are stridable, otherwisefalse
.
If the index types in the ranges differ and all of them can be promoted
to the same type, then that type is used as the idxType
. Otherwise,
the domain literal is invalid.
Example.
The expression
{1..5, 1..5}
defines a rectangular domain with typedomain(rank=2,
idxType=int,
stridable=false)
. It is a \(5 \times 5\) domain with the indices:\[(1, 1), (1, 2), \ldots, (1, 5), (2, 1), \ldots (5, 5).\]
A domain expression may contain bounds which are evaluated at runtime.
Example.
In the code
var D: domain(2) = {1..n, 1..n};
D
is defined as a twodimensional, nonstridable rectangular domain with an index type of2*int
and is initialized to contain the set of indices \((i,j)\) for all \(i\) and \(j\) such that \(i \in {1, 2, \ldots, n}\) and \(j \in {1, 2, \ldots, n}\).
The default value of a domain type is the rank
default range values
for type:
range(idxType, BoundedRangeType.bounded, stridable)
Example (rectangularDomain.chpl).
The following creates a twodimensional rectangular domain and then uses this to declare an array. The array indices are iterated over using the domain’s
dim()
method, and each element is filled with some value. Then the array is printed out.Thus, the code
var D : domain(2) = {1..2, 1..7}; var A : [D] int; for i in D.dim(0) do for j in D.dim(1) do A[i,j] = 7 * i**2 + j; writeln(A);produces
8 9 10 11 12 13 14 29 30 31 32 33 34 35
Associative Domains¶
Associative domains represent an arbitrary set of indices of a given
type and can be used to describe sets or to create dictionarystyle
arrays (hash tables). The type of indices of an associative domain, or
its idxType
, can be any primitive type except void
or any class
type.
Associative Domain Types¶
An associative domain type is parameterized by idxType
, the type of
the indices that it stores. The syntax is as follows:
associativedomaintype:
'domain' ( associativeindextype )
associativeindextype:
typeexpression
The associativeindextype
determines the idxType
of the
associative domain type.
When an associative domain is used as the index set of an array, the relation between the indices and the array elements can be thought of as a map between the values of the index set and the elements stored in the array.
Associative Domain Values¶
An associative domain’s value is simply the set of all index values that the domain describes. The iteration order over the indices of an associative domain is undefined.
Specification of an associative domain literal value follows a similar syntax as rectangular domain literal values. What differentiates the two are the types of expressions specified in the comma separated list. Use of values of a type other than ranges will result in the construction of an associative domain.
associativedomainliteral:
{ associativeexpressionlist }
associativeexpressionlist:
nonrangeexpression
nonrangeexpression, associativeexpressionlist
nonrangeexpression:
expression
It is required that the types of the values used in constructing an associative domain literal value be of the same type. If the types of the indices does not match a compiler error will be issued.
Note
Future
Due to implementation of
==
over arrays it is currently not possible to use arrays as indices within an associative domain.
Example (associativeDomain.chpl).
The following example illustrates construction of an associative domain containing string indices “bar” and “foo”. Note that due to internal hashing of indices the order in which the values of the associative domain are iterated is not the same as their specification order.
This code
var D : domain(string) = {"bar", "foo"}; writeln(D);produces the output
{foo, bar}
If uninitialized, the default value of an associative domain is the empty index set.
Indices can be added to or removed from an associative domain as described in Adding and Removing Domain Indices.
Simple Subdomain Types and Values¶
A subdomain is a domain whose indices are guaranteed to be a subset of those described by another domain known as its parent domain. A subdomain has the same type as its parent domain, and by default it inherits the domain map of its parent domain. All domain types support subdomains.
Simple subdomains are subdomains which are not sparse. Sparse subdomains are discussed in the following section (Sparse Subdomain Types and Values). A simple subdomain inherits its representation (regular or irregular) from its base domain (or base subdomain). A sparse subdomain is always irregular, even if its base domain is regular.
In all other respects, the two kinds of subdomain behave identically. In this specification, “subdomain” refers to both simple and sparse subdomains, unless it is specifically distinguished as one or the other.
Rationale.
Subdomains are provided in Chapel for a number of reasons: to facilitate the ability of the compiler or a reader to reason about the interrelationship of distinct domain variables; to support the author’s ability to omit redundant domain mapping specifications; to support the compiler’s ability to reason about the relative alignment of multiple domains; and to improve the compiler’s ability to prove away bounds checks for array accesses.
Simple Subdomain Types¶
A simple subdomain type is specified using the following syntax:
simplesubdomaintype:
'subdomain' ( domainexpression )
This declares that domainexpression
is the parent domain of this
subdomain type. A simple subdomain specifies a subdomain with the same
underlying representation as its base domain.
Open issue.
An open semantic issue for subdomains is when a subdomain’s subset property should be reverified once its parent domain is reassigned and whether this should be done aggressively or lazily.
Simple Subdomain Values¶
The value of a simple subdomain is the set of all index values that the subdomain describes.
The default value of a simple subdomain type is the same as the default value of its parent’s type (Rectangular Domain Values, Associative Domain Values).
A simple subdomain variable can be initialized or assigned to with a
tuple of values of the parent’s idxType
. Indices can also be added
to or removed from a simple subdomain as described in
Adding and Removing Domain Indices. It is an error to
attempt to add an index to a subdomain that is not also a member of the
parent domain.
Sparse Subdomain Types and Values¶
sparsesubdomaintype:
'sparse' 'subdomain'[OPT] ( domainexpression )
This declaration creates a sparse subdomain. Sparse subdomains are irregular domains that describe an arbitrary subset of a domain, even if the parent domain is a regular domain. Sparse subdomains are useful in Chapel for defining sparse arrays in which a single element value (usually “zero”) occurs frequently enough that it is worthwhile to avoid storing it redundantly. The set difference between a sparse subdomain’s index set and that of parent domain is the set of indices for which the sparse array will store this replicated value. See Sparse Arrays for details about sparse arrays.
Sparse Subdomain Types¶
Each root domain type has a unique corresponding sparse subdomain type. Sparse subdomains whose parent domains are also sparse subdomains share the same type.
Sparse Subdomain Values¶
A sparse subdomain’s value is simply the set of all index values that the domain describes. If the parent domain defines an iteration order over its indices, the sparse subdomain inherits that order.
There is no literal syntax for a sparse subdomain. However, a variable of a sparse subdomain type can be initialized using a tuple of values of the parent domain’s index type.
The default value for a sparse subdomain value is the empty set.
Example.
The following code declares a twodimensional dense domain
D
, followed by a two dimensional sparse subdomain ofD
namedSpsD
. SinceSpsD
is uninitialized, it will initially describe an empty set of indices fromD
.const D: domain(2) = {1..n, 1..n}; var SpsD: sparse subdomain(D);
Domain Index Types¶
Each domain value has a corresponding compilerprovided index type which can be used to represent values belonging to that domain’s index set. Index types are described using the following syntax:
indextype:
'index' ( domainexpression )
A variable with a given index type is constrained to take on only values available within the domain on which it is defined. This restriction allows the compiler to prove away the bound checking that code safety considerations might otherwise require. Due to the subset relationship between a base domain and its subdomains, a variable of an index type defined with respect to a subdomain is also necessarily a valid index into the base domain.
Since an index types are known to be legal for a given domain, it may also afford the opportunity to represent that index using an optimized format that doesn’t simply store the index variable’s value. This fact could be used to support accelerated access to arrays declared over that domain. For example, iteration over an index type could be implemented using memory pointers and strides, rather than explicitly calculating the offset of each index within the domain.
These potential optimizations may make it less expensive to index into arrays using index type variables of their domains or subdomains.
In addition, since an index type is associated with a specific domain or
subdomain, it carries more semantic weight than a generic index. For
example, one could iterate over a rectangular domain with integer bounds
using an int(n)
as the index variable. However, it would be more
precise to use a variable of the domain’s index type.
Open issue.
An open issue for index types is what the semantics should be for an index type value that is live across a modification to its domain’s index set—particularly one that shrinks the index set. Our hypothesis is that most stored indices will either have short lifespans or belong to constant or monotonically growing domains. But these semantics need to be defined nevertheless.
Iteration Over Domains¶
All domains support iteration via standard for
, forall
, and
coforall
loops. These loops iterate over all of the indices that the
domain describes. If the domain defines an iteration order of its
indices, then the indices are visited in that order.
The type of the iterator variable for an iteration over a domain named
D
is that domain’s index type, index(D)
.
Domains as Arguments¶
This section describes the semantics of passing domains as arguments to functions.
Formal Arguments of Domain Type¶
When a domain value is passed to a formal argument of compatible domain type by default intent, it is passed by reference in order to preserve the domain’s identity.
Domain Promotion of Scalar Functions¶
Domain values may be passed to a scalar function argument whose type matches the domain’s index type. This results in a promotion of the scalar function as defined in Promotion.
Example.
Given a function
foo()
that accepts real floating point values and an associative domainD
of typedomain(real)
,foo
can be called withD
as its actual argument which will result in the function being invoked for each value in the index set ofD
.
Example.
Given an array
A
with element typeint
declared over a onedimensional domainD
withidxType
int
, the array elements can be assigned their corresponding index values by writing:A = D;This is equivalent to:
forall (a,i) in zip(A,D) do a = i;
Domain Operations¶
Chapel supplies predefined operators and functions that can be used to manipulate domains. Unless otherwise noted, these operations are applicable to a domain of any type, whether a base domain or a subdomain.
Domain Assignment¶
All domain types support domain assignment.
domainexpression:
domainliteral
domainname
domainassignmentexpression
domainstridingexpression
domainalignmentexpression
domainsliceexpression
domainliteral:
rectangulardomainliteral
associativedomainliteral
domainassignmentexpression:
domainname = domainexpression
domainname:
identifier
Domain assignment is by value and causes the target domain variable to take on the index set of the righthand side expression. In practice, the righthand side expression is often another domain value; a tuple of ranges (for regular domains); or a tuple of indices or a loop that enumerates indices (for irregular domains). If the domain variable being assigned was used to declare arrays, these arrays are reallocated as discussed in Association of Arrays to Domains.
It is an error to assign a stridable domain to an unstridable domain without an explicit conversion.
Example.
The following three assignments show ways of assigning indices to a sparse domain,
SpsD
. The first assigns the domain two index values,(1,1)
and(n,n)
. The second assigns the domain all of the indices along the diagonal from(1,1)
\(\ldots\)(n,n)
. The third invokes an iterator that is written toyield
indices read from a file named “inds.dat”. Each of these assignments has the effect of replacing the previous index set with a completely new set of values.SpsD = ((1,1), (n,n)); SpsD = [i in 1..n] (i,i); SpsD = readIndicesFromFile("inds.dat");
Domain Comparison¶
Equality operators are defined to test if two distributions are equivalent or not:
dist1 == dist2 dist1 != dist2Or to test if two domains are equivalent or not:
dom1 == dom2 dom1 != dom2
Domain Striding¶
The by
operator can be applied to a rectangular domain value in
order to create a strided rectangular domain value. The righthand
operand to the by
operator can either be an integral value or an
integral tuple whose size matches the domain’s rank.
domainstridingexpression:
domainexpression 'by' expression
The type of the resulting domain is the same as the original domain but
with stridable
set to true. In the case of an integer stride value,
the value of the resulting domain is computed by applying the integer
value to each range in the value using the by
operator. In the case
of a tuple stride value, the resulting domain’s value is computed by
applying each tuple component to the corresponding range using the
by
operator.
Domain Alignment¶
The align
operator can be applied to a rectangular domain value in
order to change the alignment of a rectangular domain value. The
righthand operand to the align
operator can either be an integral
value or an integral tuple whose size matches the domain’s rank.
domainalignmentexpression:
domainexpression 'align' expression
The type of the resulting domain is the same as the original domain but
with stridable
set to true. In the case of an integer alignment
value, the value of the resulting domain is computed by applying the
integer value to each range in the value using the align
operator.
In the case of a tuple alignment value, the resulting domain’s value is
computed by applying each tuple component to the corresponding range
using the align
operator.
Domain Slicing¶
Slicing is the application of an index set to a domain. It can be written using either parentheses or square brackets. The index set can be defined with either a domain or a list of ranges.
domainsliceexpression:
domainexpression [ slicingindexset ]
domainexpression ( slicingindexset )
slicingindexset:
domainexpression
rangeexpressionlist
The result of slicing, or a slice, is a new domain value that represents the intersection of the index set of the domain being sliced and the index set being applied. The type and domain map of the slice match the domain being sliced.
Slicing can also be performed on an array, resulting in aliasing a subset of the array’s elements (Array Slicing).
Domainbased Slicing¶
If the brackets or parentheses contain a domain value, its index set is applied for slicing.
Open issue.
Can we say that it is an alias in the case of sparse/associative?
Rangebased Slicing¶
When slicing rectangular domains or arrays, the brackets or parentheses
can contain a list of rank
ranges. These ranges can either be
bounded or unbounded. When unbounded, they inherit their bounds from the
domain or array being sliced. The Cartesian product of the ranges’ index
sets is applied for slicing.
Example.
The following code declares a two dimensional rectangular domain
D
, and then a number of subdomains ofD
by slicing intoD
using bounded and unbounded ranges. TheInnerD
domain describes the inner indices of D,Col2OfD
describes the 2nd column ofD
, andAllButLastRow
describes all ofD
except for the last row.const D: domain(2) = {1..n, 1..n}, InnerD = D[2..n1, 2..n1], Col2OfD = D[.., 2..2], AllButLastRow = D[..n1, ..];
RankChange Slicing¶
For multidimensional rectangular domains and arrays, substituting integral values for one or more of the ranges in a rangebased slice will result in a domain or array of lower rank.
The result of a rankchange slice on an array is an alias to a subset of the array’s elements as described in Rectangular Array Slicing.
The result of rankchange slice on a domain is a subdomain of the domain
being sliced. The resulting subdomain’s type will be the same as the
original domain, but with a rank
equal to the number of dimensions
that were sliced by ranges rather than integers.
Count Operator¶
The #
operator can be applied to dense rectangular domains with a
tuple argument whose size matches the rank of the domain (or optionally
an integer in the case of a 1D domain). The operator produces a new domain
obtained by applying the #
operator to each of the component ranges
of the argument domain, with the same domain map as the argument.
Adding and Removing Domain Indices¶
All irregular domain types support the ability to incrementally add and
remove indices from their index sets. This can either be done using
add(i:idxType)
and remove(i:idxType)
methods on a domain
variable or by using the +=
and =
assignment operators. It is
legal to add the same index to an irregular domain’s index set twice,
but illegal to remove an index that does not belong to the domain’s
index set.
Open issue.
These remove semantics seem dangerous in a parallel context; maybe add flags to both the method versions of the call that say whether they should balk or not? Or add exceptions…
As with normal domain assignments, arrays declared in terms of a domain being modified in this way will be reallocated as discussed in Association of Arrays to Domains.
Set Operations on Associative Domains¶
Associative domains (and arrays) support a number of operators for set manipulations. The supported set operators are:
+ , 
Union
&
Intersection

Difference
^
Symmetric Difference
Predefined Routines on Domains¶
 config const defaultHashTableResizeThreshold = 0.5¶
Fractional value that specifies how full this domain can be before requesting additional memory. The default value of 0.5 means that the map will not resize until the map is more than 50% full. The acceptable values for this argument are between 0 and 1, exclusive, meaning (0,1). A lower defaultHashTableResizeThreshold value can potentially improve indexing performance, since the table will likely have fewer collisions, while a higher value can help save memory. Note that this value also impacts all of Chapel’s hashbased data structures, such as set and map.
 config param noNegativeStrideWarnings = false¶
Compile with
snoNegativeStrideWarnings
to suppress the warning about arrays and slices with negative strides.
 proc domainDistIsLayout(d: domain) param¶
 type domain¶
The domain type
 proc init(_pid: int, _instance, _unowned: bool)¶
 proc init(value)
 proc init(d: _distribution, param rank: int, type idxType = int, param stridable: bool = false, definedConst: bool = false)
 proc init(d: _distribution, param rank: int, type idxType = int, param stridable: bool = false, ranges: rank*range(idxType, BoundedRangeType.bounded, stridable), definedConst: bool = false)
 proc init(d: _distribution, type idxType, param parSafe: bool = true, definedConst: bool = false)
 proc init(d: _distribution, dom: domain, definedConst: bool = false)
 proc init=(const ref other: domain)¶
 proc init=(const ref other: domain)
 proc dist¶
Return the domain map that implements this domain
 proc rank param¶
Return the number of dimensions in this domain
 proc idxType type¶
Return the type used to represent the indices of this domain. For a multidimensional domain, this will represent the perdimension index type.
 proc fullIdxType type¶
Return the full type used to represent the indices of this domain. For a 1D or associative domain, this will be the same as
idxType
above. For a multidimensional domain, it will berank
*idxType
.
 proc intIdxType type¶
The
idxType
as represented by an integer type. WhenidxType
is an enum type, this evaluates toint
. Otherwise, it evaluates toidxType
.
 proc stridable param¶
Return true if this is a stridable domain
 iter these()¶
Yield the domain indices
 proc this(i: integral ...rank)¶
 proc dims()¶
Return a tuple of ranges describing the bounds of a rectangular domain. For a sparse domain, return the bounds of the parent domain.
 proc dim(d: int)¶
Return a range representing the boundary of this domain in a particular dimension.
 proc shape: rank*int¶
Return a tuple of
int
values representing the size of each dimension.For a sparse domain, this returns the shape of the parent domain.
 type unsafeAssignManager¶
An instance of this type is a context manager that can be used in manage statements to resize arrays of nondefaultinitializable element types after resizing their underlying domain.
Using an instance of this type in a manage statement will cause a domain assignment to occur before executing the statement body. The lefthandside of the assignment is the receiver domain that had
unsafeAssign()
called on it, while the righthandside is the dom formal of the same call.If the assignment adds new indices to the assigned domain, then corresponding elements are added to arrays declared over it. If an array’s element type is nondefaultinitializable, then any newly added elements remain uninitialized.
The
initialize()
method can be used within the manage statement body to initialize new elements of nondefaultinitializable arrays declared over the assigned domain.The new elements of defaultinitializable arrays over the assigned domain will be defaultinitialized. They can be set to desired values as usual, for example using an assignment operator.
 proc checks param¶
Returns
true
if this manager has runtime safety checks enabled. proc isElementInitialized(arr: [?d], idx)¶
Return
true
if the value at a given index in an array has been initialized. proc initialize(arr: [?d], idx, in value: arr.eltType)¶
Initialize a newly added array element at an index with a new value.
If checks is
true
and the array element at idx has already been initialized, this method will halt. If checks isfalse
, then calling this method on an already initialized element will result in undefined behavior.It is an error if idx is not a valid index in arr.
 iter newIndices()¶
Iterate over any new indices that will be added to this domain as a result of unsafe assignment.
 proc ref unsafeAssign(const ref dom: domain, param checks: bool = false)¶
Returns an instance of
unsafeAssignManager
.The returned context manager can be used in a manage statement to assign the indices of dom into the receiver domain. Within the body of the manage statement, the manager can initialize elements of nondefaultinitializable arrays declared over the receiver domain.
If checks is
true
, this method will guarantee that:Newly added elements of any nondefaultinitializable arrays declared over the receiver domain have been initialized by the end of the manage statement
Newly added elements are only initialized once
These guarantees hold only for initialization done through calls to the
initialize()
method on the context manager. Performing any other operation on a newly added array element causes undefined behavior until afterinitialize()
has been called.For example:
var D = {0..0}; var A: [D] shared C = [new shared C(0)]; manage D.unsafeAssign({0..1}, checks=true) as mgr { // 'D' has a new index '1', so 'A' has a new element at '1', // which we need to initialize: mgr.initialize(A, 1, new shared C(1)); }
Note
Checks are not currently supported for arrays of nondefaultinitializable element types other than arrays of nonnilable classes.
 Arguments
dom – The domain to assign to the receiver
checks – If this manager should provide runtime safety checks
 Returns
A
unsafeAssignManager
for use in manage statements
 proc ref clear()¶
Remove all indices from this domain, leaving it empty
 proc ref add(in idx)¶
Add index
idx
to this domain. This method is also available as the+=
operator.The domain must be irregular.
 proc makeIndexBuffer(size: int)¶
Warning
makeIndexBuffer has been renamed to createIndexBuffer
 proc createIndexBuffer(size: int)¶
Creates an index buffer which can be used for faster index addition.
For example, instead of:
var spsDom: sparse subdomain(parentDom); for i in someIndexIterator() do spsDom += i;
You can use SparseIndexBuffer for better performance:
var spsDom: sparse subdomain(parentDom); var idxBuf = spsDom.createIndexBuffer(size=N); for i in someIndexIterator() do idxBuf.add(i); idxBuf.commit();
The above snippet will create a buffer of size N indices, and will automatically commit indices to the sparse domain as the buffer fills up. Indices are also committed when the buffer goes out of scope.
 Arguments
size :
int
– Size of the buffer in number of indices.
Warning
createIndexBuffer() is subject to change in the future.
 proc ref bulkAdd(inds: [] (_value.rank*_value.idxType), dataSorted = false, isUnique = false, preserveInds = true, addOn = nilLocale)¶
Adds indices in
inds
to this domain in bulk.For sparse domains, an operation equivalent to this method is available with the
+=
operator, where the righthandside is an array. However, in that case, default values will be used for the flagsdataSorted
,isUnique
, andpreserveInds
. This method is available because in some cases, expensive operations can be avoided by setting those flags. To do so,bulkAdd
must be called explicitly (instead of+=
).Note
Right now, this method and the corresponding
+=
operator are only available for sparse domains. In the future, we expect that these methods will be available for all irregular domains.Note
nilLocale
is a sentinel value to denote that the locale where this addition should occur is unknown. We expect this to change in the future. Arguments
inds – Indices to be added.
inds
must be an array ofrank*idxType
, except for 1D domains, where it must be an array ofidxType
.dataSorted :
bool
–true
if data ininds
is sorted.isUnique :
bool
–true
if data ininds
has no duplicates.preserveInds :
bool
–true
if data ininds
needs to be preserved.addOn :
locale
– The locale where the indices should be added. Default value isnil
which indicates that locale is unknown or there are more than one.
 Returns
Number of indices added to the domain
 Return type
int
Warning
bulkAdd() is subject to change in the future.
 proc ref remove(idx)¶
Remove index
idx
from this domain
 proc ref requestCapacity(capacity)¶
Request space for a particular number of values in an domain.
Currently only applies to associative domains.
 proc size: int¶
Return the number of indices in this domain as an
int
.
 proc sizeAs(type t: integral): t¶
Return the number of indices in this domain as the specified type
 proc lowBound¶
Returns the domain’s ‘pure’ low bound. For example, given the domain
{1..10 by 2}
,.lowBound
would return 1, whereas.low
would return 2 since it’s the lowest index represented by the domain. This routine is only supported on rectangular domains.
 proc low¶
Return the lowest index represented by a rectangular domain.
 proc highBound¶
Return the domain’s ‘pure’ high bound. For example, given the domain
{1..10 by 2}
,.highBound
would return 10, whereas.high
would return 9 since it’s the highest index represented by the domain. This routine is only supported on rectangular domains.
 proc high¶
Return the highest index represented by a rectangular domain.
 proc stride¶
Return the stride of the indices in this domain
 proc alignment¶
Return the alignment of the indices in this domain
 proc first¶
Return the first index in this domain
 proc last¶
Return the last index in this domain
 proc alignedLow¶
Return the low index in this domain factoring in alignment
Warning
‘.alignedLow’ is deprecated; please use ‘.low’ instead
 proc alignedHigh¶
Return the high index in this domain factoring in alignment
Warning
‘.alignedHigh’ is deprecated; please use ‘.high’ instead
 proc contains(idx: _value.idxType ...rank)¶
Return true if this domain contains
idx
. Otherwise return false. For sparse domains, only indices with a value are considered to be contained in the domain.
 proc contains(other: domain)
Returns true if this domain contains all the indices in the domain
other
.
 proc orderToIndex(order: int)¶
Returns the ith index in the domain counting from 0. For example,
{2..10 by 2}.orderToIndex(2)
would return6
.The order of a multidimensional domain follows its serial iterator. For example,
{1..3, 1..2}.orderToIndex(3)
would return(2, 2)
.Note
Right now, this method supports only dense rectangular domains with numeric indices
 Arguments
order – Order for which the corresponding index in the domain has to be found.
 Returns
Domain index for a given order in the domain.
 proc orderToIndex(order)
 proc expand(off: rank*integral)¶
Return a new domain that is the current domain expanded by
off(d)
in dimensiond
ifoff(d)
is positive or contracted byoff(d)
in dimensiond
ifoff(d)
is negative.See
ChapelRange.range.expand
for further information about what it means to expand a range.
 proc expand(off: integral)
Return a new domain that is the current domain expanded by
off
in all dimensions ifoff
is positive or contracted byoff
in all dimensions ifoff
is negative.See
ChapelRange.range.expand
for further information about what it means to expand a range.
 proc exterior(off: rank*integral)¶
Return a new domain that is the exterior portion of the current domain with
off(d)
indices for each dimensiond
. Ifoff(d)
is negative, compute the exterior from the low bound of the dimension; if positive, compute the exterior from the high bound.See
ChapelRange.range.exterior
for further information about what it means to compute the exterior of a range.
 proc exterior(off: integral)
Return a new domain that is the exterior portion of the current domain with
off
indices for each dimension. Ifoff
is negative, compute the exterior from the low bound of the dimension; if positive, compute the exterior from the high bound.See
ChapelRange.range.exterior
for further information about what it means to compute the exterior of a range.
 proc interior(off: rank*integral)¶
Return a new domain that is the interior portion of the current domain with
off(d)
indices for each dimensiond
. Ifoff(d)
is negative, compute the interior from the low bound of the dimension; if positive, compute the interior from the high bound.See
ChapelRange.range.interior
for further information about what it means to compute the exterior of a range.
 proc interior(off: integral)
Return a new domain that is the interior portion of the current domain with
off
indices for each dimension. Ifoff
is negative, compute the interior from the low bound of the dimension; if positive, compute the interior from the high bound.See
ChapelRange.range.interior
for further information about what it means to compute the exterior of a range.
 proc translate(off: rank*integral)¶
Return a new domain that is the current domain translated by
off(d)
in each dimensiond
.See
ChapelRange.range.translate
for further information about what it means to translate a range.
 proc translate(off: integral)
Return a new domain that is the current domain translated by
off
in each dimension.See
ChapelRange.range.translate()
for further information about what it means to translate a range.
 proc isEmpty(): bool¶
Return true if the domain has no indices
 proc localSlice(r ...rank)¶
Return a local view of the subarray (slice) defined by the provided range(s), halting if the slice contains elements that are not local.
Indexing into this local view is cheaper, because the indices are known to be local.
 proc localSlice(d: domain)
Return a local view of the subarray (slice) defined by the provided domain, halting if the slice contains elements that are not local.
Indexing into this local view is cheaper, because the indices are known to be local.
 iter sorted(comparator: ?t = chpl_defaultComparator())¶
Yield the domain indices in sorted order
 proc safeCast(type t: domain)¶
Cast a rectangular domain to another rectangular domain type. If the old type is stridable and the new type is not stridable, ensure that the stride was 1.
 proc targetLocales() const ref¶
Return an array of locales over which this domain has been distributed.
 proc hasSingleLocalSubdomain() param¶
Return true if the local subdomain can be represented as a single domain. Otherwise return false.
 proc localSubdomain(loc: locale = here)¶
Return the subdomain that is local to loc.
 Arguments
loc :
locale
– indicates the locale for which the query should take place (defaults to here)
 iter localSubdomains(loc: locale = here)¶
Yield the subdomains that are local to loc.
 Arguments
loc :
locale
– indicates the locale for which the query should take place (defaults to here)
 proc isRectangular() param¶
Return true if this domain is a rectangular. Otherwise return false.
 proc isIrregular() param¶
Return true if
d
is an irregular domain; e.g. is not rectangular. Otherwise return false.
 proc isAssociative() param¶
Return true if
d
is an associative domain. Otherwise return false.
 proc isSparse() param¶
Return true if
d
is a sparse domain. Otherwise return false.
 3
This is also known as rowmajor ordering.