fileIO.chpl¶

File I/O Primer

Some configuration to set up the examples.

config var n = 9,
           filename = "Arr.dat";
config const num = 128*1024;
config const example = 0;
config const testfile = "test.bin";
config const epsilon = 10e-13;

use FileSystem;
use IO;

Textual Array I/O¶

This is a simple example of using file I/O in Chapel. It initializes an array and writes its size and data to a file. It then opens the file, uses the size in the file to declare a new domain and array, and reads in the array data.

if example == 0 || example == 1 {

  // Create a domain of the specified problem size.
  const ADom = {1..n, 1..n};

  // Create and initialize an array of the specified size.
  var A: [ADom] real = [(i,j) in ADom] i + j/10.0;

  // Write the problem size and array out to the specified filename.
  writeSquareArray(n, A, filename);

  // Read an array in from the specified filename, storing in a new variable, B.
  var B = readArray(filename);

  // Print out B as a debugging step.
  writeln("B is:\n", B);

  // Verify that the values in A and B are within tolerance.
  const numErrors = + reduce [i in ADom] (abs(A(i) - B(i)) > epsilon);

  if (numErrors > 0) {
    writeln("FAILURE");
  } else {
    writeln("SUCCESS");
  }
}

This procedure writes a square array out to a file.

proc writeSquareArray(n, X, filename) {

  // Create and open an output file with the specified filename in write mode.
  var outfile = open(filename, ioMode.cw);
  var writer = outfile.writer();

  // Write the problem size in each dimension to the file.
  writer.writeln(n, " ", n);

  // Write out the array itself.
  writer.write(X);

  // Close the file.
  writer.close();
  outfile.close();
}

This procedure reads a new array out of a file and returns it.

proc readArray(filename) {

   // Open an input file with the specified filename in read mode.
  var infile = open(filename, ioMode.r);
  var reader = infile.reader();

  // Read the number of rows and columns in the array in from the file.
  var m = reader.read(int),
      n = reader.read(int);

  // Declare an array of the specified dimensions.
  var X: [1..m, 1..n] real;

  // Read in the array (row-major order is used for whole-array reads
  // like this).
  reader.read(X);

  // Close the file.
  reader.close();
  infile.close();

  // Return the array.
  return X;
}

Binary I/O¶

Here we will write numbers 0..n-1 to a file in binary, then we’ll open it up and read the numbers in reverse, to show how to seek in a file.

There are two versions of this example:

a simple version

a slightly more complicated version that has some performance hints

Here comes the simple version!

if example == 0 || example == 2 {
  writeln("Running Example 2");

First, open up a test file. Chapel’s I/O interface allows us to open regular files, temporary files, memory, or file descriptors;

var f = open(testfile, ioMode.cwr);

Since the typical ‘file position’ design leads to race conditions all over, the Chapel I/O design separates a file from a channel. A channel is a buffer to a particular spot in a file. Channels can have a start and and end, so that if you’re doing parallel I/O to different parts of a file with different channels, you can partition the file to be assured that they do not interfere.

{
  // Get a binary writing channel for the start of the file.
  var w = f.writer(serializer=new binarySerializer());

  for i in 0..#num {
    var tmp:uint(64) = i:uint(64);
    w.write(tmp); // writing a uint(64) will write 8 bytes.
  }

  // Now w goes out of scope, flushing anything that is buffered.
  // Channels are reference-counted and should close when they go out
  // of scope, but we close it manually here to be sure.
  w.close();
}

Now that we have written our data file, we will read it backwards. Note: This could be a forall loop to do I/O in parallel!

for i in 0..#num by -1 {
  var start = 8*i;
  var r = f.reader(deserializer=new binaryDeserializer(), region=start..#8);
  var tmp:uint(64);
  r.read(tmp);
  assert(tmp == i:uint(64));
  r.close();
}

Now close the file, even though they are reference-counted like channels. We can also remove the test file with FileSystem.remove.

  f.close();
  remove(testfile);
}

Here is the slightly more complicated but faster version, using some hints. This time we’re not going to use a temporary file, because we want to open it twice for performance reasons. If you want to measure the performance difference, try:

time ./fielIOv2 --example=2
time ./fielIOv2 --example=3

if example == 0 || example == 3 {
  writeln("Running Example 3");

First, open up a file and write to it.

{
  var f = open(testfile, ioMode.cwr);

  // When we create the writer, supplying locking=false will do unlocked I/O.
  // That's fine as long as the channel is not shared between tasks.
  var w = f.writer(serializer=new binarySerializer(), locking=false);

  for i in 0..#num {
    var tmp:uint(64) = i:uint(64);
    w.write(tmp);
  }

  w.close();
  f.close();
}

Now that we’ve created the file, when we open it for read access and hint ‘random access’ and ‘keep data cached/assume data is cached’, we can optimize better (using mmap, if you like details).

  {
    var f = open(testfile, ioMode.r,
                hints=ioHintSet.random | ioHintSet.prefetch);

    // This is a forall loop to do I/O in parallel!
    forall i in 0..#num by -1 {
      var start = 8*i;
      // When we create the reader, supplying locking=false will do unlocked I/O.
      // That's fine as long as the channel is not shared between tasks;
      // here it's just used as a local variable, so we are O.K.
      var r = f.reader(deserializer=new binaryDeserializer(), locking=false, region=start..#8);
      var tmp:uint(64);
      r.read(tmp);
      assert(tmp == i:uint(64));
      r.close();
    }

    f.close();
  }

  remove(testfile);
}

Reading and printing UTF-8 lines¶

Here we show that it’s easy to read the lines in a file, including UTF-8 characters.

if example == 0 || example == 4 {
  writeln("Running Example 4");

  var f = open(testfile, ioMode.cwr);
  var w = f.writer();

  w.writeln("Hello");
  w.writeln("This");
  w.writeln(" is ");
  w.writeln(" a test ");

  w.writeln(" of UTF-8 Euro Sign: €");

  // flush buffers, close the channel.
  w.close();

  var r = f.reader();
  var line:string;
  while( r.readLine(line) ) {
    write("Read line: ", line);
  }
  r.close();

  f.close();
  remove(testfile);
}

Error handling¶

Now we will show that error handling is possible with the new I/O routines. Maybe one day this strategy will be replaced by something more durable, but until then, Chapel programs can still respond to errors.

if example == 0 || example == 5 {
  import OS.POSIX.ENOENT;
  writeln("Running Example 5");

  try! {
    // Who knows, maybe 1st removal succeeds.
    remove(testfile);

    // File does not exist by now, for sure.
    remove(testfile);

    assert(false); // never reached
  } catch e: SystemError {
    assert(e.err == ENOENT);
  }

  try! {
    // What happens if we try to open a non-existent file?
    var f = open(testfile, ioMode.r);

    assert(false); // never reached
  } catch e: SystemError {
    assert(e.err == ENOENT);
  }
}

Note that if an error= argument is not supplied to an I/O function, it will call ioerror, which will in turn halt with an error message.

Object-at-a-time writing¶

In this example that output from multiple tasks can use the same channel, and each write() call will be completed entirely before another one is allowed to begin.

if example == 0 || example == 6 {
  writeln("Running Example 6");

  forall i in 1..4 {
    writeln("This should be a chunk: {", "\n a", "\n b", "\n}");
  }

  record MyThing : writeSerializable {
    proc serialize(writer, ref serializer) throws {
      writer.writeln("This should be a chunk: {");
      writer.writeln(" a");
      writer.writeln(" b");
      writer.writeln("}");
    }
  }

  forall i in 1..4 {
    var t:MyThing;
    write(t);
  }
}

Binary I/O with bits at a time¶

Here we demonstrate bit-level I/O.

if example == 0 || example == 7 {
  writeln("Running Example 7");

  var f = open(testfile, ioMode.cwr);

  {
    var w = f.writer(serializer=new binarySerializer());

    // Write 011 0110 011110000
    w.writeBits(0b011, 3);
    w.writeBits(0b0110, 4);
    w.writeBits(0b011110000, 9);
    w.close();
  }

  // Try reading it back the way we wrote it.
  {
    var r = f.reader(deserializer=new binaryDeserializer());
    var tmp:uint(64);

    r.readBits(tmp, 3);
    assert(tmp == 0b011);

    r.readBits(tmp, 4);
    assert(tmp == 0b0110);

    r.readBits(tmp, 9);
    assert(tmp == 0b011110000);

    r.close();
  }

  // Try reading it back all as one big chunk.
  // Read 01101100 11110000
  {
    var r = f.reader(deserializer=new binaryDeserializer());
    var tmp:uint(8);

    r.read(tmp);
    assert(tmp == 0b01101100);

    r.read(tmp);
    assert(tmp == 0b11110000);

    r.close();
  }

  f.close();
}