All About Compiler-Generated Code

Where is it? How to compile it?

By default: in a temporary directory, deleted when the compiler exits (only the executable remains).

--savec DIRECTORY:

makes it go to DIRECTORY and stay there.

To recompile:

make -f DIRECTORY/Makefile

--print-commands:

shows commands issued by the compiler

Why are my identifiers renamed in the generated code?

  • Note that all user identifiers are munged by default in Chapel’s generated code to prevent inadvertent conflicts with identifiers from other C libraries and headers against which Chapel is linked (see the chpl man page for --[no-]munge-user-idents for more information). This can have the downside of making the generated code not correspond with the Chapel source in a way that can make reading the code, as well as debugging and profiling it, slightly more complicated. Compiling with the --no-munge-user-idents flag can reduce the degree to which this is done (and for most programs, should still work fine).

  • In some cases, Chapel does additional munging in order to turn legal Chapel into legal C (e.g., Chapel supports overloads but C doesn’t). This munging cannot be disabled by a flag and is typically necessary (though Chapel is sometimes overly conservative in deciding to munge). Generally, the more C-like your code is, the less this should happen.

How to benchmark/time it?

  • in Chapel: you want to time only the important code, excluding the startup time. See the Time Module.

use Time;
var mytimer:Timer;
mytimer.clear();

mytimer.start();

... measured code goes here ...
mytimer.stop();

writeln("time taken: " + mytimer.elapsed() + " seconds");
  • build your runtime optimized:

    cd $CHPL_HOME/runtime
    make clean
    make DEBUG=0 OPTIMIZE=1
    

    Note: currently you can have only one compilation of the runtime.Manipulate $CHPL_HOME/{runtime,lib} yourself if you want to have one copy for timing, another for debugging, etc.

  • when compiling, use:

    --fast

    This option (a) removes safety checks (e.g. for null pointers, array index bounds, etc.), and (b) compiles the generated code with optimization.

  • in C code: mimick the Chapel runtime, for apples-to-apples, e.g:

// from chpltypes.h

typedef double _real64;

#define chpl_seconds_timer(time) ((_real64)((time).tv_sec))

#define chpl_microseconds_timer(time) ((_real64)((time).tv_usec))

// current timer, in fractional seconds
double gettimer(struct timeval *timer) {
   int dummy = gettimeofday(timer, NULL);  // ignore the return code
   return chpl_seconds_timer(*timer) + 1.0e-6 * chpl_microseconds_timer(*timer);
}

struct timeval mytimer;
double start = gettimer(&mytimer);

... measured code goes here ...
double elapsedSeconds = gettimer(&mytimer) - start;

Debugging the generated code

Using gdb and other debugging features are also discussed in:

$CHPL_HOME/doc/rst/usingchapel/executing.rst

  • If you want to debug the runtime library as well, build your runtime so:

    cd $CHPL_HOME/runtime
    make clean
    make DEBUG=1 OPTIMIZE=0
    

    Note: currently you can have only one compilation of the runtime (see above).

  • When compiling, use:

    -g --savec DIRECTORY

  • By default gdb will step through/refer to the Chapel source code.

    To make gdb find it, put the following in your ~/.gdbinit:

define sdirs
 directory $arg0/modules/internal
 directory $arg0/modules/standard
 directory $arg0/modules/dists
 directory $arg0/modules/layouts
end

then call sdirs from the gdb prompt (do not use ~ or $CHPL_HOME), e.g.:

(gdb) sdirs /users/vass/chapel
(gdb)
  • To have gdb refer to the actual generated C code, compile with:

    -g --savec DIRECTORY2 --c-line-numbers

  • GDB’s TUI mode is discussed in CompilerDebugging.rst and, e.g., here:

  • To see the IDs of the AST nodes in the generated code (see CompilerIRTricks.txt):

    --gen-ids

Profiling the generated code

We basically use gprof for profiling. (There is also gcov.)

  • Be sure your runtime is compiled with optimization (see above).

  • When compiling, use:

    --ccflags -pg --ldflags -pg --fast --savec DIRECTORY

    This produces gprof-enabled executable. (See gprof docs if unfamiliar.)

    You probably want --fast --savec, but they do not affect profilability.

  • If you want to profile the runtime as well, build it so:

cd $CHPL_HOME/runtime
make clean
make DEBUG=0 OPTIMIZE=1 PROFILE=1

Note: currently you can have only one compilation of the runtime (see above).

Debugging/profiling the generated code, alternative approach

You might find it more convenient to debug and profile (gprof/gcov) the same version of the generated code.

  • Keep track of how your runtime is presently built (see above).

  • When compiling, use --savec but not -g (I think), --ccflags, or --ldflags, for example:

    --fast --savec DIR --c-line-numbers

  • Option A: run make -f DIR/Makefile then adjust the compilation commands being issued. (You might even be able to redirect the compilation to different runtime/lib directories.)

  • Option B is to replace DIR/Makefile with the following (change a.out to your preferred executable name):

ifneq ($(DB),)
EXTR_FLAGS += -g
EXTR_sfx += .db
endif

ifneq ($(GP),)
EXTR_FLAGS += -pg
EXTR_sfx += .gp
endif

ifneq ($(GC),)
EXTR_FLAGS += -fprofile-arcs -ftest-coverage
EXTR_sfx += .gc
endif

ifneq ($(DB),)
# don't want OPT_CFLAGS
COMP_GEN_CFLAGS = $(EXTR_FLAGS) $(WARN_GEN_CFLAGS)               $(NO_IEEE_FLOAT_GEN_CFLAGS)
else
COMP_GEN_CFLAGS = $(EXTR_FLAGS) $(WARN_GEN_CFLAGS) $(OPT_CFLAGS) $(NO_IEEE_FLOAT_GEN_CFLAGS)
endif

COMP_GEN_LFLAGS = $(EXTR_FLAGS)
BINNAME = a.out$(EXTR_sfx)
TMPDIRNAME := $(dir $(lastword $(MAKEFILE_LIST)))
TMPBINNAME = $(TMPDIRNAME)a.out.tmp
CHAPEL_ROOT = $(CHPL_HOME)
TAGS_COMMAND = -@which $(CHPL_TAGS_UTIL) > /dev/null 2>&1 && test -f $(CHAPEL_ROOT)/runtime/$(CHPL_TAGS_FILE) && cd $(TMPDIRNAME) && cp $(CHAPEL_ROOT)/runtime/$(CHPL_TAGS_FILE) . && $(CHPL_TAGS_UTIL) $(CHPL_TAGS_FLAGS) $(CHPL_TAGS_APPEND_FLAG) *.c *.h

CHPLSRC = $(TMPDIRNAME)_main.c
LIBS =

include $(CHAPEL_ROOT)/runtime/etc/Makefile.include

Do all compilations in DIR (e.g. the directory with the generated code).

make DB=1   # generates 'a.out.db' for debugging
make GP=1   # generates 'a.out.gp' for gprof
make GC=1   # generates 'a.out.gc' for gcov

For gcov, you may need to rename a couple of files by hand:

rm *.c.gcov *.gcda *.gcno
make GC=1
./a.out.gc <whatever options you have for a.out>
mv a.out{.tmp,}.gcda
mv a.out{.tmp,}.gcno
gcov a.out.gc

Profiling only parts of the runtime

Do you want gprof/gcov/... to look only at certain parts of the runtime, to reduce profiling overhead, making the results more true to reality?

One way to do so is to transplant those parts from the runtime into the generated code, patching everything involved to satisfaction (e.g. so that those parts compile and the generated code refers to them instead of the original runtime). This can easily be laborious, but you get good control over what’s going on.

Be sure NOT to re-run the Chapel compiler.

Miscellanea

grepcomp

greprt

grepmod

Shortcuts in $CHPL_HOME/util/devel to grep the compiler, runtime, and Chapel module sources, resp.