chplvis¶

A Task and Communication Debug Tool for Chapel¶

chplvis is a tool to help the Chapel programmer visualize their Chapel program’s tasks and communication between locales. Using the standard module VisualDebug, the programmer controls what part of their program generates information for chplvis. During the run of a program using the VisualDebug module, data files are created that are used as input for chplvis. This document will help you understand the VisualDebug module and the chplvis tool.

Setup¶

chplvis is built by giving the command make chplvis at the top level of the chapel tree. This also builds the GUI tool, FLTK, required to build and run chplvis. (Note: Some versions of Linux may require the standard package libx11-dev to be installed before FLTK will compile properly.) To get the most out of this primer, you should compile and run the example programs and examine the VisualDebug results with chplvis. The example programs are found on the path examples/primers/chplvis. The graphics in this primer were produced on a system using the fifo threads instead of the default, qthreads, for the tasking layer. If you use qthreads, your task count may differ from the examples.

Chapel Source Code¶

To use chplvis, the programmer adds code to their program. In many cases, the programmer may want to investigate only part of the program. This is accomplished by having functions startVdebug and stopVdebug to control where to start and stop the instrumentation of their program. Compilation and execution of these programs remain the same. When the startVdebug is executed, a collection of files, one per locale, are created in a directory with the name given in startVdebug.

Example 1¶

Consider the chapel program chplvis1.chpl: (The example programs in this primer are found in the directory examples/primers/chplvis in your distribution tree.)

// chplvis: Basic Usage

//  Example 1 using visual debug

//  The standard module "VisualDebug" is needed to generate data
//  during the program's run for chplvis.

use VisualDebug;

//  This call requests the VisualDebug system to start the
//  generation of data files that tracks communication
//  between locales and tasks.

startVdebug("E1");

//  This is a simple loop that runs tasks on all locales

coforall loc in Locales do
  on loc do writeln("Hello from locale ", here.id, ".");

//  This stops the VisualDebug system and close the data files.

stopVdebug();

//  Now that the program has completed and generated data files,
//  run "chplvis E1" to look at the results.

Compiling the program and running it with the options -nl 6 will then produce a directory called E1 containing 6 data files, one for each of the locales and named E1-n where n is replaced with the locale number, a number from 0 to 5. Once this directory is created, one can run chplvis as chplvis E1 or simply chplvis and then open the file E1/E1-0 from the file/open menu. The resulting display is:

(Note: This image is from an X11 display. On OS-X, the menu bar will be on the normal menu bar at the top of the screen and will not show in the main window.)

chplvis Elements¶

The information box shows the file set opened, which tag (see Example 2 ) is displayed, the maximum values of the data currently being displayed and a color bar to help visually see what values are displayed for locales and communication. This information box is also used to show various other information as described below.
The view selection box on the left edge of the display allows the user to select how to view the VisualDebug data. There are four data views and a settings view.
The data view area box is the main display of data. The data views are the graph view, the grid view, the concurrency view and the profile view. The settings view is also displayed in the data view area.
Menus control many aspects of chplvis. These menus are different depending what data view is visible. Also, a mouse right click in the data view area will cause a pop-up menu to be shown that is a duplicate of the data view’s menus on the main menu bar.

Graph View¶

The graph view is the default view when chplvis is run. The following are shown in the graph view:

A Locale is represented by a colored box. The initial display draws the color of the locale to represent the number of tasks run at that locale. For example 1, we can see that locale 0 has the most tasks and we expect that to be 12 since that is the maximum number of tasks as shown by the color reference in the information box at the top of the window. Hover your mouse over a locale and it will display a “tooltip” that is the value for that locale.
Communication links are shown by lines between two locale boxes. The color of the line adjacent to a locale box represents the data being sent to that locale from the locale on the other end. For example 1, the line between locale 0 and locale 1 is colored red next to locale 0. This means that there is a lot of communications into locale 0 from locale 1. The blue line next to locale 1 means that there is little communication into locale 1 from locale 0.

Note

If two locales do not communicate, no line is drawn between them. If communication is only one way, the communication color for no communication is gray.
The Data menu controls what data is used for the display colors and available tooltip values. This initial data is number of tasks for locales and number of communications calls for the communication links. For locales, one can select number of tasks, CPU time, clock time or concurrency. Clock time is normally very close to equal across all locales. For the communication links, one can select number of communications or size of data sent.
The View menu allows the user to zoom in or out in the data display.

Grid View¶

The grid view displays the same information as the graph view but in a different format. The grid view display looks like:

The elements of the grid view are:

Each Locale is shown twice in this view, vertical on the left of the view and horizontal along the top of the view. The top most and left most locales represent locale 0. (If the box is big enough, the locale number is placed in the box. With a large number of locales displayed, they locale number may be too big to fit in the display box.)
Communication links are shown as boxes in the center of the display. Data transmission is from locale i on the left to locale j on the top and is shown in the box on row i and column j. This box is colored to represent the amount of data sent from locale i to locale j. (This is either the number of communications or the size of data sent as controlled by the Data menu.) Communication boxes with no color represent no communication. (The diagonal will always be white since no locale sends data to itself over the communication subsystem.)
The menus for the grid view are the same as the graph view.

Concurrency View¶

The concurrency view shows task information for a single locale. Chapel programs run by starting low level tasks to do the required jobs. This display shows the order the tasks are executed and the color of each task shows the clock time for that task. The black vertical vertical lines show the life time of the task. There are two kinds of tasks shown: tasks started remotely via the on statements (on calls) to this locale indicated by an OC and tasks started locally indicated by an L. Also, some tasks communicate with other locales and others do not. The tasks that communicate with other locales are marked with an asterisk before the OC or L.

Note

The task order may change from run to run. The following shows one possible execution order of the tasks:

Note the special Main task. It is shown as a square gray box because it was already running at the start of the displayed data.

Menus allow the user to change the displayed locale and tag. The above example does not show the tags menu because no tags were defined for this example program.

Profile View¶

Chapel programs are run by the runtime executing tasks. Each task runs an internal function. These functions are generated by the compiler and the VisualDebug system tracks these functions and tasks. In the profile view, these functions are displayed. Data collected for each function is total CPU and clock time spent in the function as well as the number of puts, gets and ‘on calls’ performed by the function. This view sorts the list of internal functions based on the chosen data. The default data is clock time. Functions with a zero value are not displayed, so not every function will be displayed for all data selections. Each line shows the data (e.g. clock), the internal function name which may not make much sense to the developer, and the Chapel source file and line number that for which the task was created. The following as an example of the profile view.

Note

Clock time for a function is total time for all tasks that run in that function. This shows a total accumulation of time, but it does not show the effects of concurrency on running time of the program. At the current time, the data does not easily yield the total time a function contributes to the overall time of a program.

Settings¶

chplvis has two settings that are set by a settings view and are saved in a file named ~/.cache/chplvis. First, the user can select custom colors for the ‘heat’ displays. The standard colors are used in this document. Next, chplvis can save the window size of the main display for use on the next execution. Both of these settings are set in the settings window. The settings window is opened via the file/settings menu option. The settings window looks like:

The Use for this run only button allows the user to choose custom heat colors for the current run only and on the next run, the default or saved colors will be used. The window size setting is ignored when this button is clicked.

Display Interaction¶

Clicking on elements of the display will bring up more information. In graph view and grid view, clicking on a locale will add a box to the information box with the information about that locale. In example 1, clicking on locale 0 when the locale data is ‘number of tasks’, ‘CPU time’ or ‘clock time’ will produce a display that looks like:

(Note: There is overhead generated in tasks, CPU time, clock time and communication for the Visual Debug function calls. chplvis removes the overhead tasks and communication from displayed values, but it can not remove the CPU and clock time overhead.)

In grid view, clicking on a communication line will create an information box with communication information for that link. Clicking red part of the line between locale 0 and locale 1 will produce a display that looks like:

It is important to notice the direction of the arrow in the header for the box. This is for communication from locale 1 to locale 0. The total number of communication calls was 12. It is further broken out into three components:

Gets: This is a communication call initiated by locale 0 to get a data located on locale 1.

Puts: This is a communication call initiated by locale 1 to put data from locale 1 onto locale 0.

On Calls: This where locale 1 starts a task running on locale 0. As part of the task start, a block of data is sent to locale 0 as an argument to the task. This data is considered a communication call by chplvis.

The same communication information box is presented in grid view when a communication box is clicked.

When the locale data selected is ‘concurrency’ in graph view or grid view, clicking on a locale will switch to the Concurrency View and select the locale which was clicked.

In the Concurrency View, clicking on a task that has communication (noted by the asterisk) will bring up a list of communications. This looks like:

The number in brackets is the clock time since the task started execution. This list gives details about the gets, puts and on calls initiated by this task.

In this list, clicking on any line that has a file name will bring up that source code file and position the display on the line responsible for the communication. This line in the source code file is highlighted.

In a similar way, in the Profile View, clicking on a function line will also display the file and line, highlighted, of the line that caused the internal function to be defined.

Tool tips are available in several of the data views. Locales in the graph and grid views have tool tips that show the value selected for display, for example, the clock time. In the grid view, the communication squares have tool tips showing the communication value selected. In the concurrency view, tool tips show the communication values and in the case of a local task, the file and line number that called that task.

Example 2¶

In many programs, one will want to look at a number of small parts of their program in addition to seeing the total statistics. chplvis2.chpl gives an example of using the VisualDebug functions tagVdebug and pauseVdebug.

// chplvis: Tags

// Example 2 of use of the VisualDebug module and chplvis tool.

use BlockDist;
use VisualDebug;

config var ncells = 10;

proc main() {

   // Create a couple of domains and a block mapped data array.
   const Domain = { 1 .. ncells };
   const mapDomain = Domain dmapped Block(Domain);

   var  data : [mapDomain] int = 1;

   // Start VisualDebug here
   startVdebug ("E2");

   // First computation step ... a simple forall
   // Even though the data is distributed, the computation is
   // on Locale 0.  chplvis shows no computation on locales
   // other than 0.   Domain is not dmapped.
   forall i in Domain do data[i] += here.id + 1;
   
   // Write the result, we want to see the results of the above
   // so we tag before we continue.  Computation only on locale 0.
   tagVdebug("writeln 1");
   writeln("data= ", data);

   // Second computation step ... using the distributed domain
   // in the forall and thus computation is distributed.  Again,
   // chplvis shows computation on all locales.
   tagVdebug("step 2");
   forall i in mapDomain do data[i] += here.id+1;

   // Don't capture the writeln
   pauseVdebug();
   writeln("data2= ", data);

   // Reduction step, computation on all locales.
   tagVdebug("reduce");
   var i = + reduce data;

   // done with visual debug
   stopVdebug();

   writeln ("sum is ", i, ".");
}
   

Note that the startVdebug("E2") is placed after the declarations so that tasks and communication for the declarations are not included. The initial display of chplvis shows data for the entire run. (This program was run on five locales.)

There is now a new menu called Tags that reflects the tagVdebug() calls in the program. Selecting the tags menu gives the following display:

There are two special tags in this menu, All and Start. All shows the initial display for the entire run and Start shows the tasks and communication only between the startVdebug("E2") call and the first call to tagVdebug(), in this case, tagVdebug("writeln 1"). The display for the Start tag looks like:

You should be able to immediately see that

Locale 0 has 3 tasks and all other locales do not have any tasks. (Locale boxes colored white mean no tasks at that locale.) This means that locale 0 is doing all the computation.

The majority of communication is happening from other locales to locale 0. By clicking on the communication links you should be to easily see that locale 0 is doing gets and puts for all the communication.

Compare the results of this first forall loop with the loop in the second computation step, tagged step 2. Notice, step 2 does not include the second writeln because of the call to pauseVdebug(). That suspends collecting task and communication data until the next tagVdebug() call.

The difference between the two loops is the domain used. Domain is not a distributed domain, so the computation remains on locale 0. The mapDomain is a distributed domain, so the computation is distributed. One needs to be careful in specifying these kind of loops to make sure you use a distributed domain if you are operating on distributed data and you want distributed computation. This is where chplvis can quickly let you know if you used the wrong domain in your forall loop.

Now, consider the writeln 1 tag display.

Notice the gray communication links. This means there was no data flow from locale 0 to the other locales. The gray links are provided to make it easy to visually see the corresponding locale.

Finally, for completeness, look at the display for the last tag used, reduce. It is very similar to the step 2 tag.

Example 3¶

The program chplvis3.chpl computes the solution of a Laplace equation using the Jacobi method. This version uses dmapped domains and VisualDebug. Only parts of the code are shown to illustrate other chplvis features. First, config variables are handy here so one can create different directories of chplvis data on different runs. Although not shown here, config params are useful to allow your program to use VisualDebug and generate data only if you need it.

// Allow different runs to create different data directories so it is
// easier to compare runs with chplvis.
config var dirname = "E3";

// Start VisualDebug here to see that distributed domain and variable
// declarations generate tasks and communication.
startVdebug(dirname);

Next, if tagVdebug() calls are made inside a loop, it produces a unique tag for each call.

// Main computation loop -- we want to see the two parts of this
// loop, the computation and the reduction part.

while (delta > epsilon) {

  // Tag the computation part of this loop
  tagVdebug("computation");

  for t in 1 .. compLoop do {
    forall (i,j) in R do
      A(i,j) = Temp(i,j);
    forall (i,j) in R do
      Temp(i,j) = (A(i-1,j) + A(i+1,j) + A(i,j-1) + A(i,j+1)) / 4.0;
  }

  // tag the reduction part of this loop.
  tagVdebug("max");
  forall (i,j) in R {
    Diff(i,j) = abs(Temp(i,j)-A(i,j));
  }
  delta = max reduce Diff;

  pauseVdebug();
  iteration += compLoop;
  if (verbose) {
    writeln("iteration: ", iteration);
    writeln("delta:     ", delta);
    writeln(Temp);
  }
}

We use pauseVdebug() here to make sure chplvis data is generated for the parts of the loop of interest.

This example was run with the command line arguments --n=8 -nl 8. The following shows the default tags menu for this run:

Notice that the tags are now numbered and the tags menu extends past the end of the window. (This screenshot does not show the entire tags menu that was displayed on the screen.) All and Start remain the same, but since two or more tags have the same name, chplvis shows a unique tag for each tagVdebug() call. Notice the new menu item above All which is highlighted in this example. Merge Tags allows you to see data for tags with the same name to be merged together. For this example, with merged tags, the tags menu now looks like:

Now, selecting the tag computation will show the accumulated tasks and communication for the entire while loop for just the computation part of the loop. This is all code between the tagVdebug("computation") call and the tagVdebug("max") call. Selecting the tag max will then show accumulated tasks and communication for the code between the tagVdebug("max") call and the pauseVdebug() call. The following shows the display for the computation tags and displaying CPU data.

The concurrency display is not available for tags in the “merge tag mode” except the All tag, which is the same for both tags mode.

This example has some extra config variables that can be used to help understand the usefulness of chplvis. For example, one can compare the CPU time used between the computation and max phases of this Jacobi computation. The config variable compLoop allows one to run the computation loop more than once before then checking for convergence in the max tagged code. It is known that the Jacobi code will not diverge and thus extra computation steps will not produce a “wrong” answer. By doing extra computation, the result will be a bit more accurate. The reader should use the compLoop and the dirname config variables to run several versions of this program yielding a chplvis directory for each run. Then one can compare the different results by running chplvis multiple times. By a good choice of the compLoop variable, one can dramatically reduce the CPU time for computing the max while not increasing the computation time by much.

Example 4¶

To help show another feature of the “Concurrency View”, chplvis4.chpl was written to create a begin task on all locales and have those tasks live across calls to the VisualDebug module. The code is:

// chplvis: Begin Tasks

// Example 4, begin tasks as shown in chplvis
// This is a contrived example to have tasks live
// across a tagVdebug() call.

use VisualDebug;
use BlockDist;

const space =  { 0 .. #numLocales };
const Dspace = space dmapped Block (boundingBox=space);

startVdebug("E4");

var go$: [Dspace] single bool;
var done$: [Dspace] single bool;

// Start a begin task on all locales.  The task will start and then block.
coforall loc in Locales do
  on loc do begin { // start a async task

              go$[here.id]; // Block until ready!
              writeln ("Finishing running the 'begin' statement on locale "
                       , here.id, ".");
              done$[here.id] = true;
           }

tagVdebug("loc");

coforall loc in Locales do
    on loc do writeln("Hello from ", here.id);

tagVdebug("finish");

// Let all tasks go
go$ = true;

// Wait until all tasks are finished
done$;

stopVdebug();

First we will look at the results of running this code on a single locale. Even though there is no communication, chplvis can help you see how tasks are run, especially how much concurrency you have.

This view shows the tasks for locale 0, the only locale in this run. Things to notice from this view are

Main represents the main program. It is shown as a gray rectangular box to show that it was running at the time of startVdebug() was called.

In the tag ALL view, tags are shown in the sequence of tasks.

Task OC 29 is started before the loc tag, but it finishes in the finish tag.

This view shows the tasks for locale 1 on a 3 locale run for the tag loc. In this view, the task started before the loc tag appears as a gray rectangular box at the top of the view. This indicates that is was running at the start of the tag. The lack of a task termination horizontal line on the task line indicates that the task continued running past the end of the tag. Tasks that are running at the beginning of a tag and terminate during a tag can be seen by the horizontal termination line, such as for task C50, a continued task for locale 0 on the same 3 locale run as seen next.

Main will always show as a continued task with no termination. Main is shown only for locale 0. Main is included in the calculation of concurrency as seen above.

Config Parameters and Variables¶

Because VisualDebug support requires added procedure calls in source to use it, there is a boolean config const, VisualDebugOn that controls generation of VisualDebug data. This may be set on the execution command line like any config const. The standard default value is true. This default value may be changed at compile time by setting the config param DefaultVisualDebugOn. If this is set to false at compile time then VisualDebugOn must be set to true on the execution command line to generate VisualDebug data.

Final Comments¶

The following items are not covered above:

The command line for chplvis is:
chplvis [name]
where name may be the name of the directory or a file in the directory generated by a run of a program using VisualDebug. If name is not given, it looks for the directory named .Vdebug which is generated if the startVdebug function is given a string of zero length. (“”)
In all the examples given, all calls to xVdebug() routines were essentially in the main program. While this will not be the case in all programs, a couple of things should be noted.

All calls run code on all locales.

All calls should be made from locale 0.

Calls should not be made in on statements. While such programs should run, the chplvis data will mostly likely not make much sense.

Calls should not be made in begin statements for similar reasons.

Calls should not be made in forall or coforall statements.

chplvis was created in 2015 and first released with Chapel-1.12.0. The Chapel team hopes this tool will be of use to Chapel programmers and would like feedback on this tool.

Author:	Philip A. Nelson