Chapel Launchers

When compiling Chapel programs for multiple locales, a launcher binary is typically created that will execute the appropriate command(s) to get your program started. For example, when compiling for multiple locales, typically two binaries will be generated by the compiler (e.g., myprogram and myprogram_real). The first binary contains code to get your program up and running on multiple locales while the second contains your actual program code.

The goals of the launcher binary are:

  1. to wrap details of job startup in a portable way so that new users can quickly get Chapel programs up and running on an unfamiliar platform.
  2. to perform command-line parsing and error checking prior to waiting in a queue or firing off a parallel job in order to save time and resources related to simple errors/typos in the command line.
  3. to preserve Chapel's global-view programming model by permitting the user to run their program using a single binary (corresponding to the single logical task that executes main()) without getting bogged down in questions of numbers of nodes, numbers of cores per node, numbers of program instances to start up, etc.
  4. if necessary, to coordinate runtime functional activity, such as I/O.

Executing a Chapel program using the verbose (-v) flag will typically print out the command(s) used to launch the program.

Executing using the help (-h/--help) flag will typically print out any launcher-specific options in addition to the normal help message for the program itself.

Currently Supported Launchers

Currently supported launchers include:

Launcher Name Description
amudprun GASNet launcher for programs running over UDP
aprun Cray application launcher using aprun
gasnetrun_ibv GASNet launcher for programs running over Infiniband
gasnetrun_mpi GASNet launcher for programs using the MPI conduit
gasnetrun_ofi GASNet launcher for programs using the OFI conduit
gasnetrun_psm GASNet launcher for programs running over OmniPath
lsf-gasnetrun_ibv GASNet launcher using LSF (bsub) over Infiniband
pbs-aprun Cray application launcher using PBS (qsub) + aprun
pbs-gasnetrun_ibv GASNet launcher using PBS (qsub) over Infiniband
slurm-gasnetrun_ibv GASNet launcher using SLURM over Infiniband
slurm-srun native SLURM launcher
smp GASNet launcher for programs running over shared-memory
none do not use a launcher

A specific launcher can be explicitly requested by setting the CHPL_LAUNCHER environment variable. If left unset, a default is picked as follows:

  • if CHPL_PLATFORM is cray-xc, cray-xe, or cray-xk:

    If CHPL_LAUNCHER
    both aprun and srun in user's path none
    aprun in user's path aprun
    srun in user's path slurm-srun
    otherwise none
  • otherwise, if CHPL_COMM is gasnet:

    If CHPL_LAUNCHER
    CHPL_COMM_SUBSTRATE=ibv gasnetrun_ibv
    CHPL_COMM_SUBSTRATE=mpi gasnetrun_mpi
    CHPL_COMM_SUBSTRATE=mxm gasnetrun_ibv
    CHPL_COMM_SUBSTRATE=ofi gasnetrun_ofi
    CHPL_COMM_SUBSTRATE=psm gasnetrun_psm
    CHPL_COMM_SUBSTRATE=smp smp
    CHPL_COMM_SUBSTRATE=udp amudprun
    otherwise none
  • otherwise CHPL_LAUNCHER is set to none

If the launcher binary does not work for your system (due to an installation-specific configuration, e.g.), you can often use the -v flag to capture the commands that the launcher executes on your behalf and customize them for your needs.

Forwarding Environment Variables

Chapel launchers generally arrange for environment variables to be forwarded to worker processes. However, this strategy is not always reliable. The remote system may override some environment variables, and some launchers might not correctly forward all environment variables.

Using Slurm

To use native Slurm, set:

export CHPL_LAUNCHER=slurm-srun

On Cray systems, this will happen automatically if srun is found in your path, but not when both srun and aprun are found in your path. Native Slurm is the best option where it works, but at the time of this writing, there are problems with it when combined with UDP or InfiniBand conduits. So, for these configurations please see:

Common Slurm Settings

Before running, you will need to set the amount of time to request from SLURM. For example, the following requests 15 minutes:

export CHPL_LAUNCHER_WALLTIME=00:15:00

Another Slurm variable that usually needs to be set is the Slurm partition to use. For example, set the Slurm partition to 'debug' with the commands:

export SALLOC_PARTITION=debug
export SLURM_PARTITION=$SALLOC_PARTITION

If needed, you can request a specific node feature from SLURM by putting it in the CHPL_LAUNCHER_CONSTRAINT environment variable. For example, to use nodes with the 'cal' feature (as defined in the slurm.conf file), set:

export CHPL_LAUNCHER_CONSTRAINT=cal

If this environment variable is undefined, SLURM may use any node in the computer.

If the environment variable CHPL_LAUNCHER_USE_SBATCH is defined then sbatch is used to launch the job to the queue system, rather than running it interactively as usual. In this mode, the output will be written by default to a file called <executableName>.<jobID>.out. The environment variable CHPL_LAUNCHER_SLURM_OUTPUT_FILENAME can be used to specify a different filename for the output.

Using any SSH-based launcher with Slurm

It is possible to use any SSH-based launcher with Slurm, with some additionally effort. This strategy can come in handy if other launchers are not working. However, launchers such as slurm-srun and slurm-gasnetrun_ibv offer a better experience.

First, let's see how to use an SSH-based launcher with an interactive salloc session. Here we will assume the UDP conduit, but any other launcher supporting SSH can be configured analogously.

# Compile a sample program
chpl -o hello6-taskpar-dist examples/hello6-taskpar-dist.chpl

# Reserve 2 nodes for an interactive run
salloc -N 2
# Then, within the salloc shell

  # Specify that ssh should be used
  export GASNET_SPAWNFN=S
  # Specify the list of nodes to use
  export GASNET_SSH_SERVERS=`scontrol show hostnames | xargs echo`
  # Run the program on the 2 reserved nodes.
  ./hello6-taskpar-dist -nl 2

This strategy can also be used within an sbatch script. Here is an example script to save to the file job.bash:

#!/bin/bash
#SBATCH -t 0:10:0
#SBATCH --nodes=2
#SBATCH --exclusive
#SBATCH --partition=chapel
#SBATCH --output=job.output

export GASNET_SPAWNFN=S
export GASNET_SSH_SERVERS=`scontrol show hostnames | xargs echo`

./hello6-taskpar-dist -nl 2

To run this job, use:

sbatch job.bash

and when it completes, the output will be available in job.output as specified in job.bash.

Changing the _real binary suffix

In order to support profiling tools that produce new binaries for the launcher to execute, the suffix of the real binary executed by the launcher may be changed with the CHPL_LAUNCHER_SUFFIX environment variable. If this variable is unset, the suffix defaults to "_real", matching the compiler's output.

Bypassing the launcher

If the Chapel launcher capability fails you completely, set CHPL_LAUNCHER to none, recompile, and execute the resulting binary according to the following rules using tools and queueing mechanisms appropriate for your system:

  • on most systems, the number of locales should be equal to the number of nodes on which you execute. That in turn should match the number of copies of the program that you are running.
  • some queueing systems require you to specify the number of cores to use per node. For best results, you will typically want to use all of them. All intra-node parallelism is typically implemented using Chapel's threading layer (e.g., pthreads), so extra copies of the binary are not required per core.
  • in our experience, this technique does not work for InfiniBand configurations.

Additional launchers

In addition to the supported launchers listed above there are several others that are not actively maintained but may still work.

Launcher Name Description
loadleveler launch using IBM loadleveler (still needs refining)
marenostrum launch using MareNostrum's mnsubmit script
mpirun launch using mpirun (no mpi comm currently)

These launchers are the default for the following configurations:

If CHPL_LAUNCHER
CHPL_PLATFORM=marenostrum marenostrum